Specification sheet Wheel Loader Ref komatsu-wa380-7-wheel-loader

Komatsu WA380-7

The Komatsu WA380-7 is a wheel loader with a 142 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
142hp
105.9kW
Net Power

Where it sits in its classnot positioned

This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.

01 Engine Specification

Number Of Cylinders 6
Engine Make 2238
Engine Model SAA6D107E-2
Net Power 142hp 105.9kw
Gross Power 143hp 106.7kw
Power Measured @ 2100rpm
Displacement 408.3cu in 6.7L
Aspiration TURBOCHARGED

02 Operational Specification

Fuel Capacity 79.3gal 300.2L
Hydraulic System Fluid Capacity 37.5gal 142L
Engine Oil Fluid Capacity 6.1gal 23.1L
Cooling System Fluid Capacity 14.4gal 54.6L
Transmission Fluid Capacity 14.3gal 54.2L
Front Axle/Diff Fluid Capacity 10.6gal 40.2L
Rear Axle/Diff Fluid Capacity 10.6gal 40.2L
Turning Radius 20.9ft in 6370.4mm
Tire Size 23.5-25

03 Transmission Specification

Transmission Type FULL POWERSHIFT
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 40mph 64.4km/h
Max Speed - Reverse 40mph 64.4km/h

04 Hydraulic System Specification

Relief Valve Setting 3555psi 24510.9kPa
Pump Flow Capacity 36.2gal/min 137.1L/min
Raise Time 5.9sec
Dump Time 1.8sec
Lower Time 3.3sec
Pump Type PISTON PUMP

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.