Specification sheet Wheel Loader Ref komatsu-wa320-7-wheel-loader
Komatsu WA320-7
The Komatsu WA320-7 is a wheel loader with a 165 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
165hp
123.1kW
Net Power ◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | SAA6D107E-2 | |
| Net Power | 165hp | 123.1kw |
| Gross Power | 173hp | 129.1kw |
| Power Measured @ | 2100rpm | |
| Aspiration | TURBOCHARGED |
02 Operational Specification
| Fuel Capacity | 64.7gal | 245L |
|---|---|---|
| Hydraulic System Fluid Capacity | 23.7gal | 89.8L |
| Engine Oil Fluid Capacity | 6.1gal | 23.1L |
| Cooling System Fluid Capacity | 6.1gal | 23.1L |
| Front Axle/Diff Fluid Capacity | 7.1gal | 26.9L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25.4L |
| Turning Radius | 17.8ft in | 5425.5mm |
| Tire Size | 20.5-25 |
03 Transmission Specification
| Transmission Type | HYDROSTATIC | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.6mph | 38km/h |
| Max Speed - Reverse | 23.6mph | 38km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2700psi | 18615.9kPa |
|---|---|---|
| Pump Flow Capacity | 29.1gal/min | 110.2L/min |
| Raise Time | 5.7sec | |
| Dump Time | 1.6sec | |
| Lower Time | 3.3sec | |
| Pump Type | GEAR TYPE PUMP |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.