Specification sheet Wheel Loader Ref komatsu-wa30-5-wheel-loader
Komatsu WA30-5
The Komatsu WA30-5 is a wheel loader with a 29 hp engine, and a 0.52 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
29hp
21.3kW
Gross Power Bucket capacity
0.52yd³
0.4m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2238 | |
| Engine Model | 3D84E-3B | |
| Gross Power | 29hp | 21.3kw |
| Power Measured @ | 2500rpm | |
| Displacement | 91cu in | 1.5L |
| Aspiration | Natural |
02 Operational Specification
| Fuel Capacity | 11.9gal | 42L |
|---|---|---|
| Hydraulic System Fluid Capacity | 7.4gal | 28L |
| Static Tipping Weight | 4285lb | 1948kg |
| Turning Radius | 10.5ft in | 3210mm |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 9.3mph | 15km/h |
| Max Speed - Reverse | 9.3mph | 15km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2990psi | -- |
|---|---|---|
| Raise Time | 4.6sec | |
| Dump Time | 1sec | |
| Lower Time | 2.8sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7ft in | 2140mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.52yd3 | 0.4m3 |
| Bucket Width | 5.17ft in | 1575mm |
| Breakout Force | 5950lb | 2700kN |
06 Dimensions Dimensions
| Ground Clearance | 0.88ft in | 270mm |
|---|---|---|
| Length With Bucket On Ground | 13.25ft in | 4030mm |
| Width Over Tires | 4.92ft in | 1495mm |
| Height To Top Of Cab | 8.08ft in | 2460mm |
| Wheelbase | 5.75ft in | 1750mm |
| Hinge Pin - Max Height | 8.83ft in | 2680mm |
| Reach At Max Lift And Dump | 2.58ft in | 785mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.