Specification sheet Backhoe Loader Ref komatsu-wa30-1-loader-backhoe
Komatsu WA30-1
The Komatsu WA30-1 is a backhoe loader with a 26.2 hp engine, a 0.45 yd³ (0.34 m³) bucket, and a dig depth of 8.32 ft (2,535 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
26.2hp
19.6kW
Gross Power Bucket capacity
0.45yd³
0.34m³
Dig depth
8.32ft
2,535mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Komatsu WA30-1 sits at the compact end of its class:
- Engine power 26 hp less powerful than 97% (n=282)
- Dig depth 8.3 ft shallower-digging than 97% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2238 | |
|---|---|---|
| Engine Model | 2D94-2 | |
| Gross Power | 26.2hp | 19.6kw |
| Displacement | 89.7cu in | 1.5L |
02 Operational Specification
| Operating Weight 2wd | 6812.3lb | 3090kg |
|---|---|---|
| Fuel Capacity | 8gal | 30L |
| Cooling System Fluid Capacity | 2.5gal | 9.2L |
| Turning Radius | 12ft in | 3630mm |
| Tire Size Front - 2wd / 4wd | 33x12.5-15-6PR (L-2) | |
| Rear Tires Size 2wd/4wd | 33x12.5-15-6PR (L-2) |
03 Transmission Specification
| Transmission Type | planetary gear | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 9.4mph | 15km/h |
| Max Speed Reverse | 9.4mph | 15km/h |
04 Backhoe Dimensions
| Load Height - Std | 6.5ft in | 1980mm |
|---|---|---|
| Reach From Swivel - Std | 11.14ft in | 3395mm |
| Dig Depth - Std | 8.32ft in | 2535mm |
| Bucket Dig Force - Std | 4144.7lb | 1880kg |
05 Dimensions Dimensions
| Transport Length | 13.67ft in | 4165mm |
|---|---|---|
| Transport Width | 4.93ft in | 1500mm |
| Transport Height | 6.44ft in | 1960mm |
| Wheelbase | 5.42ft in | 1650mm |
| Ground Clearance | 0.76ft in | 230mm |
06 Loader Dimensions
| Clearance At Max Dump Height | 6.57ft in | 2000mm |
|---|---|---|
| Reach At Max Dump Height | 2.3ft in | 700mm |
| Bucket Width | 61.82in | 1570mm |
| Bucket Capacity | 0.45yd3 | 0.34m3 |
| Bucket Breakout Force | 5140lb | 22.8kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.