Specification sheet Wheel Loader Ref komatsu-wa270-7-wheel-loader
Komatsu WA270-7
The Komatsu WA270-7 is a wheel loader with a 148.9 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
148.9hp
111kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | SAA6D107E-2 | |
|---|---|---|
| Net Power | 148.9hp | 111kw |
| Gross Power | 154.3hp | 115kw |
| Power Measured @ | 2000rpm | |
| Displacement | 408.3cu in | 6.7L |
| Aspiration | Turbo-charged | |
| Bore | 4.3in | 107mm |
| Stroke | 4.9in | 124mm |
02 Operational Specification
| Fuel Capacity | 49.2gal | 186L |
|---|---|---|
| Hydraulic System Fluid Capacity | 20.7gal | 78L |
| Engine Oil Fluid Capacity | 6.1gal | 23L |
| Cooling System Fluid Capacity | 7.4gal | 28L |
| Front Axle/Diff Fluid Capacity | 4.9gal | 18.5L |
| Rear Axle/Diff Fluid Capacity | 4.8gal | 18L |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.6mph | 38km/h |
| Max Speed - Reverse | 23.6mph | 38km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000 psi | |
|---|---|---|
| Pump Flow Capacity | 39.7gal/min | 150L/min |
| Raise Time | 5.7sec | |
| Dump Time | 2sec | |
| Lower Time | 3.2sec | |
| Pump Type | Hydraulic |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.77ft in | 2975mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
| Bucket Capacity - Struck | 2.75yd3 | 2.1m3 |
| Bucket Width | 8.37ft in | 2550mm |
| Breakout Force | 29449.97lb | 131kN |
06 Dimensions Dimensions
| Ground Clearance | 1.53ft in | 465mm |
|---|---|---|
| Length With Bucket On Ground | 23.97ft in | 7305mm |
| Width Over Tires | 8.22ft in | 2505mm |
| Height To Top Of Cab | 10.5ft in | 3200mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 13.01ft in | 3965mm |
| Reach At Max Lift And Dump | 2.66ft in | 810mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.