Specification sheet Wheel Loader Ref komatsu-wa200pt-5-wheel-loader

Komatsu WA200PT-5

The Komatsu WA200PT-5 is a wheel loader with a 120 hp engine, and a 2.49 yd³ (1.9 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
120hp
89.5kW
Net Power
Bucket capacity
2.49yd³
1.9m³

Where it sits in its classnot positioned

This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.

Scale drawingdrawn to scale · mm

3180B495C7661A
Side elevation
3180B2492D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2238
Engine Model SAA6D102E-2
Net Power 120hp 89.5kw
Gross Power 127hp 94.8kw
Power Measured @ 2000rpm
Displacement 365cu in 6L
Aspiration turbocharged

02 Operational Specification

Fuel Capacity 48.7gal 184L
Hydraulic System Fluid Capacity 17.7gal 67L
Engine Oil Fluid Capacity 5.2gal 19.5L
Transmission Fluid Capacity 1.5gal 5.5L
Front Axle/Diff Fluid Capacity 4.8gal 18L
Rear Axle/Diff Fluid Capacity 4.8gal 18L
Static Tipping Weight 16852.2lb 7644kg
Turning Radius 16.3ft in 4950mm
Tire Size 20.5/25 L2

03 Transmission Specification

Transmission Type hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 23.7mph 38km/h
Max Speed - Reverse 23.7mph 38km/h

04 Hydraulic System Specification

Relief Valve Setting 3000psi 20684.3kPa
Pump Flow Capacity 41.3gal/min 156L/min
Raise Time 5.9sec
Dump Time 2sec
Lower Time 3.6sec

05 Bucket Dimensions

Dump Clearance At Max Raise 9.01ft in 2745mm
Bucket Capacity - Heaped 2.49yd3 1.9m3
Bucket Capacity - Struck 2.1yd3 1.6m3
Bucket Width 8.37ft in 2550mm
Breakout Force 24504.18lb 109kN

06 Dimensions Dimensions

Ground Clearance 1.63ft in 495mm
Length With Bucket On Ground 25.14ft in 7661mm
Width Over Tires 8.18ft in 2492mm
Height To Top Of Cab 10.44ft in 3180mm
Wheelbase 9.32ft in 2840mm
Hinge Pin - Max Height 12.59ft in 3837mm
Reach At Max Lift And Dump 2.63ft in 800mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.