Specification sheet Wheel Loader Ref komatsu-wa100m-6-wheel-loader
Komatsu WA100M-6
The Komatsu WA100M-6 is a wheel loader.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
01 Tyres Specification
| Standard | 12.0-18 | |
|---|---|---|
| Standard Fitment Size | 455/70 R20 |
02 Steering System Specification
| System | Articulated frame steering | |
|---|---|---|
| Steering Angle To Either Side | 42degrees | |
| Steering Pump | Gear pump | |
| Working Pressure | 175Bar | |
| Steering System Type | Hydrostatic( Double-action) | |
| No. Of Steering Cylinders | 2 | |
| Bore Diameter | 60 | |
| Smallest Turn (Outer Edge Of The Tyre 12.0-18) | 13.9ft in | 4230mm |
| Stroke | 1.3ft in | 369mm |
03 Engine Specification
| Horsepower, Gross-Sae J1995 | 88.6hp | 66kw |
|---|---|---|
| Horsepower, Net-Iso 9249 | 88.6hp | 66kw |
| Horsepower, Net-Sae J1349 | 88.6hp | 66kw |
| Engine Power@Iso 14396 | 885hp | 660kw |
| Air Filter Type | Dry air filter with per-filter and safety cartridge | |
| Engine Power@Engine Speedsae J134 | 536hp | 399.7kw |
| Injection System | Direct injection | |
| Electrical System | 12V | |
| Number Of Cylinders | 4 | |
| Rated Engine Speed | 2350 | |
| Engine Make | 2238 | |
| Engine Model | Komatsu SAA4D95LE-5 | |
| Max Torque | 140.2lb ft | 190Nm |
| Battery | 92AH | |
| Displacement | 201.4cu in | 3.3L |
| Bore | 3.8in | 95mm |
| Stroke | 4.6in | 115mm |
| Alternator | 90Aamps | |
| Injection | common rail direct injection | |
| Fan Drive Type | Hydraulic |
04 Driveline Specification
| Brake | Hydraulic | |
|---|---|---|
| Ride Control System | Standard | |
| Maximum Speeds Fwd | 18.7mph | 30km/h |
| Maximum Speeds Rev | 18.7mph | 30km/h |
| Transmission | Hydrostatic | |
| Number Of Speeds - Forward | 2 | |
| Number Of Speeds - Reverse | 2 |
05 Capacities Specification
| Front Axle | 646.9cu in | 10.6L |
|---|---|---|
| Transfer Box | 79.4cu in | 1.3L |
| Fuel Tank | 37gal | 140L |
| Cooling System | 3.1gal | 11.5L |
| Rear Axle | 2.9gal | 10.6L |
| Hydraulic System | 21.2gal | 80L |
| Engine Oil | 3.1gal | 11.5L |
06 Operational Specification
| Bucket Capacity Range – Sae | 1.05-1.8 m3 | |
|---|---|---|
| Standard Bucket Capacity – Sae | 1.6yd3 | 1.2m3 |
| Bucket Description | GP Bucket | |
| Static Tipping Load,Full Turn | 11331.8lb | 5140kg |
| Breakout Force | 7576 kgf | |
| Dump Clearance, @45 Degrees Dump Angle | 9ft in | 2730mm |
| Dump Reach, @45 Degrees Dump Angle | 2.8ft in | 845mm |
| Bucket Width | 7.3ft in | 2200mm |
| Bucket Link Type | Z-Bar |
07 Transmission Specification
| Drive System | Hydrostatic transmissionswitchable in all directions under full power | |
|---|---|---|
| Hydrostatic Pump | 1variable piston pump | |
| Speed Ranges (Forwards/Backward) | 2/2 | |
| Travelspeeds(Frwd)Speed Range | 0-5 KM/h | |
| Travelspeeds(Backwrd)Speed Range | 0-20 KM/h | |
| Hydrostaticmotors | 1variable motor pump |
08 Weights Specification
| Operating Weight | 6875 |
|---|
09 Hydraulic System Specification
| Steering Pump Type | Gear Pump | |
|---|---|---|
| Loader Control Type | Gear Pump | |
| Working Pressure | 270Bar | |
| Circulating Capacity Of The Hydraulic Pump | 19.9gal/min | 75L/min |
| No.Of.Bucket Cylinders | 1 | |
| Boom Cylinder | 28.2in | 714mm |
| Bucket Cylinder | 1.6ft in | 476mm |
| Kinematic | Z-Kinematic with highest breakout force | |
| System | Open hydraulic system | |
| No.Of.Boom Cylinders | 2 | |
| Lower Time | 3.5sec | |
| Hydraulic System Type | Double-action |
10 Brakes Specification
| Operating | Combined inch/brake pedal actuatesbrakes on all four wheels via hydrostaticdrive and dry disc at front axle | |
|---|---|---|
| Park Brake | Dry Disc |
11 Chassis Specification
| Sysytem | 4-wheel drive | |
|---|---|---|
| Oscillation | 10degrees |
12 Dimensions Dimensions
| Ground Clearance | 1.25ft in | 380mm |
|---|---|---|
| Height To Top Of Cab | 9.32ft in | 2840mm |
| Wheelbase | 7.88ft in | 2400mm |
| Length | 230.91in | 5865mm |
| Turning Circle | 15.59ft in | 4750mm |
| Width Over Tyres | 81.89in | 2080mm |
?Questions & answersfrom this machine's data
- What is the ground clearance of a Komatsu WA100M-6 wheel loader?
- A Komatsu WA100M-6 wheel loader has a ground clearance of 1.3 ft (380 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.