Specification sheet Wheel Loader Ref kawasaki-115zv-wheel-loader
Kawasaki 115ZV
The Kawasaki 115ZV is a wheel loader with an operating weight of 98,436.4 lb (44,650 kg), a 480 hp engine, and a 8.64 yd³ (6.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
98,436.4lb
44,650kg
Engine power
480hp
358kW
Net Power Bucket capacity
8.64yd³
6.6m³
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Kawasaki 115ZV sits below the median for its class:
- Operating weight 98,440 lb lighter than 74% (n=39)
- Engine power 480 hp more powerful than 62% (n=37)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSK19 | |
| Net Power | 480hp | 358kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 1386lb ft | 1879.2Nm |
| Displacement | 1150cu in | 18.9L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbocharged & intercooler |
02 Operational Specification
| Operating Weight | 98436.4lb | 44650kg |
|---|---|---|
| Fuel Capacity | 177gal | 670L |
| Hydraulic System Fluid Capacity | 125.5gal | 475L |
| Engine Oil Fluid Capacity | 17.5gal | 66L |
| Cooling System Fluid Capacity | 32.3gal | 122L |
| Transmission Fluid Capacity | 22.5gal | 85L |
| Front Axle/Diff Fluid Capacity | 47.6gal | 180L |
| Rear Axle/Diff Fluid Capacity | 47.6gal | 180L |
| Static Tipping Weight | 67219lb | 30490kg |
| Turning Radius | 27.1ft in | 8230mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 35/65-33-24PR (L-4) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.8mph | 35.1km/h |
| Max Speed - Reverse | 14.1mph | 22.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 48.1gal/min | 182.1L/min |
| Raise Time | 8.4sec | |
| Dump Time | 2.1sec | |
| Lower Time | 4.7sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 12.01ft in | 3660mm |
|---|---|---|
| Bucket Capacity - Heaped | 8.64yd3 | 6.6m3 |
| Bucket Capacity - Struck | 7.59yd3 | 5.8m3 |
| Bucket Width | 12.37ft in | 3770mm |
| Breakout Force | 86900lb | 386.56kN |
06 Dimensions Dimensions
| Ground Clearance | 1.81ft in | 550mm |
|---|---|---|
| Length With Bucket On Ground | 35.37ft in | 10780mm |
| Width Over Tires | 11.72ft in | 3570mm |
| Height To Top Of Cab | 13.69ft in | 4170mm |
| Wheelbase | 13.29ft in | 4050mm |
| Hinge Pin - Max Height | 16.54ft in | 5040mm |
| Reach At Max Lift And Dump | 5.55ft in | 1690mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.