Specification sheet Wheel Loader Ref kawasaki-115zv-2-wheel-loader
Kawasaki 115ZV-2
The Kawasaki 115ZV-2 is a wheel loader with an operating weight of 102,710 lb (46,590 kg), a 463 hp engine, and a 8.5 yd³ (6.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
102,710lb
46,590kg
Engine power
463hp
345.3kW
Net Power Bucket capacity
8.5yd³
6.6m³
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Kawasaki 115ZV-2 sits in the middle of its class:
- Operating weight 102,710 lb lighter than 56% (n=39)
- Engine power 463 hp more powerful than 57% (n=37)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSK19 | |
| Net Power | 463hp | 345.3kw |
| Gross Power | 506hp | 377.4kw |
| Power Measured @ | 1800rpm | |
| Max Torque | 1908lb ft | 2587Nm |
| Displacement | 1159cu in | 19L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 102710lb | 46590kg |
|---|---|---|
| Fuel Capacity | 174.4gal | 660L |
| Hydraulic System Fluid Capacity | 125.5gal | 475L |
| Engine Oil Fluid Capacity | 16.2gal | 61L |
| Cooling System Fluid Capacity | 38.4gal | 145L |
| Transmission Fluid Capacity | 23.8gal | 90L |
| Front Axle/Diff Fluid Capacity | 47.6gal | 180L |
| Rear Axle/Diff Fluid Capacity | 47.6gal | 180L |
| Static Tipping Weight | 71960lb | 32640kg |
| Turning Radius | 27.5ft in | 8370mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 35/65-33-VSDL (L-5) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.4mph | 36.1km/h |
| Max Speed - Reverse | 4.7mph | 7.6km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 61gal/min | 231L/min |
| Raise Time | 8.4sec | |
| Dump Time | 1.7sec | |
| Lower Time | 5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 11.88ft in | 3620mm |
|---|---|---|
| Bucket Capacity - Heaped | 8.5yd3 | 6.6m3 |
| Bucket Capacity - Struck | 7.5yd3 | 5.8m3 |
| Bucket Width | 12.37ft in | 3770mm |
| Breakout Force | 86900lb | 386.56kN |
06 Dimensions Dimensions
| Ground Clearance | 1.68ft in | 510mm |
|---|---|---|
| Length With Bucket On Ground | 35.7ft in | 10880mm |
| Width Over Tires | 11.68ft in | 3560mm |
| Height To Top Of Cab | 13.57ft in | 4135mm |
| Wheelbase | 13.62ft in | 4150mm |
| Hinge Pin - Max Height | 16.41ft in | 5000mm |
| Reach At Max Lift And Dump | 5.55ft in | 1690mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.