Specification sheet Wheel Loader Ref kawasaki-110zii-wheel-loader
Kawasaki 110ZII
The Kawasaki 110ZII is a wheel loader with an operating weight of 92,950 lb (42,161.42 kg), a 383 hp engine, and a 8.25 yd³ (6.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
92,950lb
42,161.42kg
Engine power
383hp
285.7kW
Net Power Bucket capacity
8.25yd³
6.3m³
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Kawasaki 110ZII sits at the compact end of its class:
- Operating weight 92,950 lb lighter than 90% (n=39)
- Engine power 383 hp less powerful than 78% (n=37)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | KT19-C | |
| Net Power | 383hp | 285.7kw |
| Power Measured @ | 2100rpm | |
| Displacement | 1150cu in | 18.9L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 92950lb | 42161.5kg |
|---|---|---|
| Fuel Capacity | 158.6gal | 600L |
| Hydraulic System Fluid Capacity | 158.6gal | 600L |
| Engine Oil Fluid Capacity | 15.6gal | 59L |
| Cooling System Fluid Capacity | 26.5gal | 100L |
| Transmission Fluid Capacity | 21.2gal | 80L |
| Front Axle/Diff Fluid Capacity | 35.2gal | 133L |
| Rear Axle/Diff Fluid Capacity | 35.2gal | 133L |
| Static Tipping Weight | 61980lb | 28113.7kg |
| Turning Radius | 27.7ft in | 8430mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 29.5-29-28PR (L-4) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 17.4mph | 28.1km/h |
| Max Speed - Reverse | 18.6mph | 30km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2490psi | 17168kPa |
|---|---|---|
| Pump Flow Capacity | 50gal/min | 189.3L/min |
| Raise Time | 9.1sec | |
| Dump Time | 1.5sec | |
| Lower Time | 4.8sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 11.68ft in | 3560mm |
|---|---|---|
| Bucket Capacity - Heaped | 8.25yd3 | 6.3m3 |
| Bucket Capacity - Struck | 6.94yd3 | 5.3m3 |
| Bucket Width | 12.37ft in | 3770mm |
| Breakout Force | 62660lb | 278.73kN |
06 Dimensions Dimensions
| Ground Clearance | 1.92ft in | 585mm |
|---|---|---|
| Length With Bucket On Ground | 30.98ft in | 9440mm |
| Width Over Tires | 11.95ft in | 3640mm |
| Height To Top Of Cab | 13.55ft in | 4130mm |
| Wheelbase | 12.54ft in | 3820mm |
| Hinge Pin - Max Height | 16.15ft in | 4920mm |
| Reach At Max Lift And Dump | 5.25ft in | 1600mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.