Specification sheet Backhoe Loader Ref john-deere-710l-loader-backhoe

John Deere 710L

The John Deere 710L is a backhoe loader.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →

Where it sits in its classnot positioned

None of the positionable specs are published for this machine.

01 Engine Specification

Engine Output-Net 148hp 110.4kw
Battery 12
Engine Make John Deere
Engine Model PowerTech Plus 4045HT084
Rated Speed 2240rpm
Displacement 274.7cu in 4.5L

02 Capacities Specification

Fuel Tank 49.1gal 185.5L
Hydraulic Tank 13.3gal 50.1L
Stick Tearout 12904.1lb 57.4kN
Boom Lift - Maximum Reach - Non-Extending Dipper 3822.9lb 1734kg
4wd Front Axle 4gal 15L
Rear Axle 6.7gal 25L
Bucket Tearout - Non-Extending Dipper 18951.4lb 84.3kN
Shovel Breakout - General Purpose 16546lb 73.6kN
Lift To Full Height - General Purpose Shovel 9865.7lb 4475kg
Shovel Capacity - Standard General Purpose 1.7yd3 1.3m3

03 Transmission Specification

Transmission Type Powershift

04 Weights Specification

Operating Weights 25589.1lb 11607kg
Weight - 4wd, Gp, Std Stick 25589.1lb 11607kg

05 Hydraulic Specification

Pump Type Axial Piston Pump
Pump Flow Capacity 52.1gal/min 197L/min

06 Brakes Specification

Actuation Hydraulic with Power Assist
Brakes Type Wet Multi Disc

07 Dimensions Dimensions

Wheelbase 8.37ft in 2550mm
Ground Clearance 1.17ft in 356mm
Dump Height 9.49ft in 2890mm
Dump Reach - General Purpose 30.24in 768mm
Height Over Ext Stick 4490 mm (14 ft 9 in)
Height Over Std Stick 14.6ft in 4450mm
Max Length With Std. Stick 27.01ft in 8230mm
Shovel Pin Height - General Purpose 12.24ft in 3730mm
Width - General Purpose Shovel 2464 mm (8 ft 1 in)
Bucket Rotation - Position 1 190
Width Over Tires 7.52ft in 2290mm
Digging Depth 6.19in 157mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.