Specification sheet Backhoe Loader Ref john-deere-710k-loader-backhoe
John Deere 710K
The John Deere 710K is a backhoe loader with an operating weight of 26,742.08 lb (12,130 kg), a 130.08 hp engine, a 1.63 yd³ (1.24 m³) bucket, and a dig depth of 17.11 ft (5,212.08 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
26,742.08lb
12,130kg
Engine power
130.08hp
97kW
Net Power Bucket capacity
1.63yd³
1.24m³
Dig depth
17.11ft
5,212.08mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 710K sits at the heavy end of its class:
- Engine power 130 hp more powerful than 100% (n=282)
- Dig depth 17.1 ft deeper-digging than 91% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | John Deere PowerTech | |
|---|---|---|
| Engine Model | E 6068HT079 | |
| Net Power | 130.1hp | 97kw |
| Power Measured @ | 2000rpm | |
| Net Torque Rise | 32% | |
| Net Max Torque | 405lb ft | 549.2Nm |
| Aspiration | Turbocharged | |
| Displacement | 415cu in | 6.8L |
02 Operational Specification
| Operating Weight 2wd | 23796.7lb | 10794kg |
|---|---|---|
| Fuel Capacity | 69gal | 261.2L |
| Max Weight | 26742.1lb | 12130kg |
| Hydraulic System Fluid Capacity | 39.6gal | 150L |
| Oil System Fluid Capacity | 5.2gal | 19.5L |
| Cooling System Fluid Capacity | 9gal | 33.9L |
| Transmission Fluid Capacity | 4gal | 15.1L |
| Front Axle Fluid Capacity | 2.4gal | 9L |
| Rear Axle Fluid Capacity | 4.3gal | 16.1L |
| Turning Radius | 14.4ft in | 4370mm |
| Tire Size Front - 2wd / 4wd | 14.5/75-16.1,10PR F3 | |
| Rear Tires Size 2wd/4wd | 21L-24,16PR R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 120amps |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.8mph | 35.1km/h |
| Max Speed Reverse | 16.5mph | 26.6km/h |
04 Hydraulic Specification
| Pump Type | Axial-piston pump | |
|---|---|---|
| Pump Flow Capacity | 52gal/min | 196.9L/min |
| Relief Valve Pressure | 3625psi | 24993.5kPa |
05 Backhoe Dimensions
| Load Height - Std | 14.3ft in | 4358.65mm |
|---|---|---|
| Reach From Swivel - Std | 22.6ft in | 6888.48mm |
| Dig Depth - Std | 17.11ft in | 5212.08mm |
| Load Height - Ext | 17ft in | 5181.61mm |
| Reach From Swivel - Ext | 26.1ft in | 7955.28mm |
| Dig Depth - Ext | 22.4ft in | 6827.52mm |
| Bucket Dig Force - Std | 17000lb | 7711.08kg |
06 Dimensions Dimensions
| Transport Length | 27ft in | 8229.6mm |
|---|---|---|
| Transport Width | 7.6ft in | 2316.48mm |
| Transport Height | 13.83ft in | 4210mm |
| Wheelbase | 8.6ft in | 2621.29mm |
| Ground Clearance | 1.17ft in | 356mm |
| Height To Top Of Suspended Cab | 9.9ft in | 3017.52mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 9.7ft in | 2956.56mm |
|---|---|---|
| Reach At Max Dump Height | 27.2ft in | 8290.56mm |
| Dig Depth | 4.1in | 104.14mm |
| Lift Capacity At Full Height | 9285.87lb | 4212kg |
| Bucket Capacity | 1.63yd3 | 1.24m3 |
| Bucket Width | 97.01in | 2464mm |
| Bucket Breakout Force | 15540lb | 69.13kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.