John Deere 710G
The John Deere 710G is a backhoe loader with an operating weight of 23,000 lb (10,430 kg), a 122 hp engine, a 1.87 yd³ (1.34 m³) bucket, and a dig depth of 17.83 ft (5,440 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 710G sits at the heavy end of its class:
- Engine power 122 hp more powerful than 99% (n=282)
- Dig depth 17.8 ft deeper-digging than 96% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2240 | |
|---|---|---|
| Engine Model | 6068T | |
| Net Power | 122hp | 91kw |
| Power Measured @ | 2000rpm | |
| Torque Measured @ | 1300rpm | |
| Net Torque Rise | 33% | |
| Net Max Torque | 397lb ft | 538.3Nm |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight 2wd | 26500lb | 12020kg |
|---|---|---|
| Fuel Capacity | 69gal | 261L |
| Max Weight | 23000lb | 10430kg |
| Hydraulic System Fluid Capacity | 42gal | 159L |
| Oil System Fluid Capacity | 5.1gal | 19L |
| Cooling System Fluid Capacity | 7.2gal | 27L |
| Transmission Fluid Capacity | 4gal | 15L |
| Front Axle Fluid Capacity | 2.8gal | 10.6L |
| Rear Axle Fluid Capacity | 4.2gal | 16L |
| Turning Radius | 10.6ft in | 3230mm |
| Tire Size Front - 2wd / 4wd | 15-19.5SS-1 | |
| Rear Tires Size 2wd/4wd | 21L-28R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Transmission Specification
| Transmission Type | 4-speed, helical cut gear, full power-shifted transmission with hydraulic reverser | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23mph | 37.1km/h |
| Max Speed Reverse | 16.1mph | 25.9km/h |
04 Hydraulic Specification
| Pump Type | Axial-piston, PCLS system | |
|---|---|---|
| Pump Flow Capacity | 52gal/min | 197L/min |
| Relief Valve Pressure | 3625psi | 25000kPa |
05 Backhoe Dimensions
| Load Height - Std | 14.25ft in | 4340mm |
|---|---|---|
| Reach From Swivel - Std | 22.5ft in | 6860mm |
| Dig Depth - Std | 17.83ft in | 5440mm |
| Reach At Load Height - Std | 26.67ft in | 8130mm |
| Load Height - Ext | 16ft in | 4880mm |
| Bucket Dig Force - Ext | 17000lb | 7711.08kg |
| Bucket Dig Force - Std | 17000lb | 7711.08kg |
| Dig Depth - Ext | 22.5ft in | 6860mm |
| Reach At Load Height - Ext | 30.83ft in | 9400mm |
| Load At Max Lift - Ext | 2496lb | 1132kg |
| Load At Max Lift - Std | 4376lb | 1985kg |
| Reach From Swivel - Ext | 26.67ft in | 8130mm |
06 Dimensions Dimensions
| Transport Length | 26.75ft in | 8150mm |
|---|---|---|
| Transport Width | 7.91ft in | 2410mm |
| Transport Height | 13.85ft in | 4220mm |
| Wheelbase | 8.24ft in | 2511mm |
| Ground Clearance | 1.17ft in | 356mm |
| Height To Top Of Suspended Cab | 9.75ft in | 2970mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 9.33ft in | 2840mm |
|---|---|---|
| Reach At Max Dump Height ‡ — value corrected — the source published it under the wrong unit | 2.53ft in | 770mm |
| Dig Depth | 4.1in | 104mm |
| Bucket Breakout Force | 14800lb | 66kN |
| Bucket Width | 36in | 914mm |
| Bucket Capacity | 1.87yd3 | 1.34m3 |
| Lift Capacity At Full Height | 8693lb | 3943kg |
Data notes
Corrected value. The source published this figure under the wrong unit. The metric figure is authoritative and the imperial value shown here is derived from it.
- Reach At Max Dump Height: shown as 2.53 ft in (source stated a value inconsistent with its own metric figure of 770 mm)
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.