Specification sheet Backhoe Loader Ref john-deere-710c-loader-backhoe

John Deere 710C

The John Deere 710C is a backhoe loader with an operating weight of 22,500 lb (10,200 kg), a 115 hp engine, a 1.75 yd³ (1.34 m³) bucket, and a dig depth of 18 ft (5,490 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
22,500lb
10,200kg
Engine power
115hp
85.76kW
Net Power
Bucket capacity
1.75yd³
1.34m³
Dig depth
18ft
5,490mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the John Deere 710C sits at the heavy end of its class:

  • Engine power 115 hp more powerful than 97% (n=282)
  • Dig depth 18 ft deeper-digging than 98% (n=256)

Scale drawingdrawn to scale · mm

4014B356C8129A
Side elevation
4014B2440D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2240
Engine Model 6059T
Gross Power 120hp 89.5kw
Net Power 115hp 85.8kw
Power Measured @ 2200rpm
Net Torque Rise 25%
Net Max Torque 343lb ft 465.1Nm
Displacement 359cu in 5.9L

02 Operational Specification

Fuel Capacity 37gal 140L
Max Weight 22500lb 10200kg
Hydraulic System Fluid Capacity 40gal 151L
Oil System Fluid Capacity 5.1gal 19L
Cooling System Fluid Capacity 6.9gal 26L
Transmission Fluid Capacity 6gal 23L
Rear Axle Fluid Capacity 4.5gal 17L
Turning Radius 14.4ft in 4370mm
Tire Size Front - 2wd / 4wd 14.5/75-16.1,10PR F3
Rear Tires Size 2wd/4wd 21L-24,16PR R4/20.5-25,12PR R4
Operating Voltage 12V
Alternator Supplied Amperage 78amps

03 Transmission Specification

Transmission Type Powershift with modulated full power shifting between forward and reverse
Number Of Forward Gears 4
Number Of Reverse Gears 2
Max Speed - Forward 21mph 33.9km/h
Max Speed Reverse 6.6mph 10.6km/h

04 Hydraulic Specification

Pump Type Radial pistons
Pump Flow Capacity 53gal/min 201L/min
Relief Valve Pressure 2550psi 17500kPa

05 Backhoe Dimensions

Load Height - Std 13.17ft in 4014.22mm
Reach From Swivel - Std 22.67ft in 6900mm
Dig Depth - Std 18ft in 5490mm
Reach At Load Height - Std 26.75ft in 8150mm
Load Height - Ext 15ft in 4570mm
Bucket Dig Force - Ext 6700lb 3039.07kg
Bucket Dig Force - Std 9600lb 4354.49kg
Dig Depth - Ext 22.75ft in 6930mm
Reach At Load Height - Ext 31.17ft in 9500mm
Load At Max Lift - Ext 3300lb 1500kg
Load At Max Lift - Std 7300lb 3300kg
Reach From Swivel - Ext 15ft in 4570mm

06 Dimensions Dimensions

Transport Length 26.67ft in 8129.02mm
Transport Width 8.01ft in 2440mm
Transport Height 13.17ft in 4014.22mm
Wheelbase 7.88ft in 2400mm
Ground Clearance 1.17ft in 356mm
Height To Top Of Suspended Cab 8.83ft in 2691.39mm

07 Loader Dimensions

Clearance At Max Dump Height 9.58ft in 2920mm
Reach At Max Dump Height 2.42ft in 737mm
Dig Depth 4in 100mm
Bucket Breakout Force 13560lb 60.3kN
Bucket Width 96in 2440mm
Bucket Capacity 1.75yd3 1.34m3
Lift Capacity At Full Height 7100lb 3230kg

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.