Specification sheet Backhoe Loader Ref john-deere-610b-loader-backhoe
John Deere 610B
The John Deere 610B is a backhoe loader with an operating weight of 14,651 lb (6,645 kg), and a 80 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,651lb
6,645kg
Engine power
80hp
60kW
Net Power ◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 610B sits in the middle of its class:
- Engine power 80 hp less powerful than 60% (n=282)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 300 Series | |
| Net Power | 80hp | 60kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1300rpm | |
| Net Max Torque | 248lb ft | 336Nm |
| Aspiration | Turbocharged | |
| Displacement | 276cu in | 4.5L |
02 Operational Specification
| Fuel Capacity | 23gal | 87.1L |
|---|---|---|
| Max Weight | 14651lb | 6645kg |
| Hydraulic System Fluid Capacity | 20gal | 76L |
| Cooling System Fluid Capacity | 4.3gal | 16.1L |
| Transmission Fluid Capacity | 20gal | 76L |
| Front Axle Fluid Capacity | 1.8gal | 6.5L |
| Rear Axle Fluid Capacity | 4.5gal | 17L |
| Tire Size Front - 2wd / 4wd | 12-16.5,8PR F3 | |
| Rear Tires Size 2wd/4wd | 19.5L-24,12PR R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 35amps |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 8 | |
| Number Of Reverse Gears | 4 |
04 Hydraulic Specification
| Pump Type | Close-Center | |
|---|---|---|
| Pump Flow Capacity | 30gal/min | 113.6L/min |
| Relief Valve Pressure | 2000psi | 13789.6kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.17ft in | 3710mm |
|---|
06 Dimensions Dimensions
| Transport Length | 12.17ft in | 3710mm |
|---|---|---|
| Transport Width | 7.67ft in | 2340mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.