Specification sheet Backhoe Loader Ref john-deere-510-loader-backhoe
John Deere 510
The John Deere 510 is a backhoe loader with an operating weight of 19,165 lb (8,693.1 kg), and a 80 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,165lb
8,693.1kg
Engine power
80hp
59.66kW
Net Power ◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 510 sits in the middle of its class:
- Engine power 80 hp less powerful than 60% (n=282)
Not positioned on dig depth — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 300 Series | |
| Net Power | 80hp | 59.7kw |
| Power Measured @ | 2500rpm | |
| Torque Measured @ | 1300rpm | |
| Net Max Torque | 202lb ft | 273.9Nm |
| Aspiration | Naturally aspirated | |
| Displacement | 270cu in | 4.5L |
02 Operational Specification
| Fuel Capacity | 34gal | 128.8L |
|---|---|---|
| Max Weight | 19165lb | 8693.1kg |
| Hydraulic System Fluid Capacity | 29.9gal | 113.2L |
| Cooling System Fluid Capacity | 4.8gal | 18L |
| Transmission Fluid Capacity | 10.5gal | 39.8L |
| Tire Size Front - 2wd / 4wd | 14.5/75-16.7 | |
| Rear Tires Size 2wd/4wd | 18.4-28 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 8 | |
| Number Of Reverse Gears | 4 |
04 Hydraulic Specification
| Pump Flow Capacity | 33gal/min | 125L/min |
|---|---|---|
| Relief Valve Pressure | 2000psi | 13789.6kPa |
05 Dimensions Dimensions
| Transport Length | 27.58ft in | 8406.39mm |
|---|---|---|
| Transport Width | 6.92ft in | 2109.22mm |
| Transport Height | 13.25ft in | 4038.6mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.