Specification sheet Backhoe Loader Ref john-deere-500c-loader-backhoe
John Deere 500C
The John Deere 500C is a backhoe loader with an operating weight of 14,180 lb (6,431 kg), and a 80 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,180lb
6,431kg
Engine power
80hp
59.66kW
Net Power ◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 500C sits in the middle of its class:
- Engine power 80 hp less powerful than 60% (n=282)
Not positioned on dig depth — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 300 Series | |
| Net Power | 80hp | 59.7kw |
| Power Measured @ | 2500rpm | |
| Torque Measured @ | 1300rpm | |
| Net Max Torque | 202lb ft | 274Nm |
| Aspiration | Naturally aspirated | |
| Displacement | 270cu in | 4.5L |
02 Operational Specification
| Fuel Capacity | 34gal | 128.7L |
|---|---|---|
| Max Weight | 14180lb | 6431kg |
| Hydraulic System Fluid Capacity | 21.5gal | 81.4L |
| Cooling System Fluid Capacity | 4.8gal | 18L |
| Transmission Fluid Capacity | 21.5gal | 81.4L |
| Tire Size Front - 2wd / 4wd | 14.5/75-16.1 10PR F3 | |
| Rear Tires Size 2wd/4wd | 18.4-28,8/12PR R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 35amps |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 8 | |
| Number Of Reverse Gears | 4 |
04 Hydraulic Specification
| Pump Type | Close-center | |
|---|---|---|
| Relief Valve Pressure | 2400psi | 16550kPa |
05 Dimensions Dimensions
| Transport Length | 24.58ft in | 7490mm |
|---|---|---|
| Transport Width | 6.92ft in | 2130mm |
| Transport Height | 11.67ft in | 3560mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.