Specification sheet Backhoe Loader Ref john-deere-410l-loader-backhoe

John Deere 410L

The John Deere 410L is a backhoe loader.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →

Where it sits in its classnot positioned

None of the positionable specs are published for this machine.

01 Engine Specification

Engine Output-Net 113hp 84.3kw
Battery 12
Engine Make John Deere
Engine Model PowerTech Plus 4045HT083
Rated Speed 2240rpm
Displacement 274.7cu in 4.5L

02 Capacities Specification

Fuel Tank 37gal 140.1L
Hydraulic Tank 11.9gal 45L
Stick Tearout 10925.8lb 48.6kN
Boom Lift - Maximum Reach - Non-Extending Dipper 4389.5lb 1991kg
4wd Front Axle 1.8gal 6.5L
Rear Axle 4.8gal 18L
Bucket Tearout - Non-Extending Dipper 17355.3lb 77.2kN
Shovel Breakout - General Purpose 10633.5lb 47.3kN
Lift To Full Height - General Purpose Shovel 7149.6lb 3243kg
Shovel Capacity - Standard General Purpose 1.4yd3 1m3

03 Transmission Specification

Transmission Type Powershift

04 Weights Specification

Operating Weights 18029.5lb 8178kg
Weight - 4wd, Gp, Std Stick 18049.3lb 8187kg

05 Hydraulic Specification

Pump Type Axial Piston Pump
Pump Flow Capacity 42.1gal/min 159L/min

06 Brakes Specification

Actuation Hydraulic with Power Assist
Brakes Type Wet Multi Disc

07 Dimensions Dimensions

Wheelbase 7.19ft in 2190mm
Ground Clearance 1.1ft in 334mm
Dump Height 8.8ft in 2680mm
Dump Reach - General Purpose 29.53in 750mm
Height Over Ext Stick 3930 mm (12 ft 11 in)
Height Over Std Stick 12.9ft in 3930mm
Max Length With Ext. Stick 24.38ft in 7430mm
Max Length With Std. Stick 24.38ft in 7430mm
Shovel Pin Height - General Purpose 11.32ft in 3450mm
Width - General Purpose Shovel 2346 mm (7 ft 8 in)
Bucket Rotation - Position 1 190
Width Over Tires 7.16ft in 2180mm
Digging Depth 6.19in 157mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.