Specification sheet Backhoe Loader Ref john-deere-410k-loader-backhoe
John Deere 410K
The John Deere 410K is a backhoe loader with an operating weight of 19,061.17 lb (8,646 kg), a 107.29 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 15.1 ft (4,602.48 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,061.17lb
8,646kg
Engine power
107.29hp
80kW
Net Power Bucket capacity
1.31yd³
1m³
Dig depth
15.1ft
4,602.48mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 410K sits at the heavy end of its class:
- Engine power 107 hp more powerful than 92% (n=282)
- Dig depth 15.1 ft deeper-digging than 63% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | John Deere PowerTech Plus | |
|---|---|---|
| Engine Model | 4045HT063 | |
| Net Power | 107.3hp | 80kw |
| Power Measured @ | 2000rpm | |
| Torque Measured @ | 1400rpm | |
| Net Torque Rise | 35% | |
| Net Max Torque | 317.2lb ft | 430Nm |
| Aspiration | Turbocharged | |
| Displacement | 274.7cu in | 4.5L |
| Bore | 3.6in | 90mm |
| Stroke | 29.3in | 744mm |
02 Operational Specification
| Operating Weight 2wd | 16391.4lb | 7435kg |
|---|---|---|
| Fuel Capacity | 41gal | 155.3L |
| Max Weight | 19061.2lb | 8646kg |
| Hydraulic System Fluid Capacity | 24.6gal | 93.2L |
| Oil System Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 8.7gal | 32.9L |
| Transmission Fluid Capacity | 4gal | 15.1L |
| Front Axle Fluid Capacity | 1.8gal | 6.5L |
| Rear Axle Fluid Capacity | 4.8gal | 18L |
| Tire Size Front - 2wd / 4wd | 14.5/75-16.1 SL F-3 | |
| Rear Tires Size 2wd/4wd | 21L-24 R-4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 120amps |
03 Transmission Specification
| Transmission Type | 5 speed, helical-cut gears, full PowerShift | |
|---|---|---|
| Number Of Forward Gears | 5 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 25mph | 40.3km/h |
| Max Speed Reverse | 13.2mph | 21.3km/h |
04 Hydraulic Specification
| Pump Type | Pressure compensated load sensing | |
|---|---|---|
| Pump Flow Capacity | 42gal/min | 159L/min |
| Relief Valve Pressure | 3625psi | 24993.5kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.6ft in | 3840.48mm |
|---|---|---|
| Reach From Swivel - Std | 19.8ft in | 6035.04mm |
| Dig Depth - Std | 15.1ft in | 4602.48mm |
| Load Height - Ext | 15.6ft in | 4754.88mm |
| Reach From Swivel - Ext | 23.8ft in | 7254.24mm |
| Dig Depth - Ext | 20ft in | 6096mm |
| Bucket Dig Force - Std | 15230lb | 6908.22kg |
06 Dimensions Dimensions
| Transport Length | 23.11ft in | 7043.93mm |
|---|---|---|
| Transport Width | 7.7ft in | 2346.96mm |
| Transport Height | 12.11ft in | 3691.13mm |
| Wheelbase | 6.11ft in | 1862.33mm |
| Ground Clearance | 1.17ft in | 356mm |
| Height To Top Of Suspended Cab | 9.31ft in | 2834.64mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.1ft in | 2468.88mm |
|---|---|---|
| Reach At Max Dump Height | 2.5ft in | 762mm |
| Dig Depth | 6.7in | 170mm |
| Lift Capacity At Full Height | 7200.3lb | 3266kg |
| Bucket Capacity | 1.31yd3 | 1m3 |
| Bucket Width | 92.01in | 2337mm |
| Bucket Breakout Force | 10300lb | 45.82kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.