Specification sheet Backhoe Loader Ref john-deere-410g-loader-backhoe
John Deere 410G
The John Deere 410G is a backhoe loader with an operating weight of 15,000 lb (6,804 kg), a 96 hp engine, a 1.25 yd³ (0.96 m³) bucket, and a dig depth of 15.83 ft (4,830 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
15,000lb
6,804kg
Engine power
96hp
71.59kW
Net Power Bucket capacity
1.25yd³
0.96m³
Dig depth
15.83ft
4,830mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 410G sits above the median for its class:
- Engine power 96 hp more powerful than 76% (n=282)
- Dig depth 15.8 ft deeper-digging than 76% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2240 | |
|---|---|---|
| Engine Model | 4045T | |
| Net Power | 96hp | 71.6kw |
| Power Measured @ | 2100rpm | |
| Torque Measured @ | 1400rpm | |
| Net Torque Rise | 23% | |
| Net Max Torque | 279lb ft | 378.3Nm |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight 2wd | 1628lb | 738kg |
|---|---|---|
| Fuel Capacity | 36gal | 136L |
| Operating Weight 4wd | 1262lb | 572kg |
| Max Weight | 15000lb | 6804kg |
| Hydraulic System Fluid Capacity | 26gal | 98L |
| Oil System Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Transmission Fluid Capacity | 4gal | 15L |
| Front Axle Fluid Capacity | 2gal | 7.6L |
| Rear Axle Fluid Capacity | 4.2gal | 16L |
| Turning Radius | 11.7ft in | 3560mm |
| Tire Size Front - 2wd / 4wd | 11L-16 F3 | |
| Rear Tires Size 2wd/4wd | 19.5L-24 R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Transmission Specification
| Transmission Type | 4-speed, helical cut gear, full power shifted transmission with hydraulic reverser | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 20.5mph | 33km/h |
| Max Speed Reverse | 16.1mph | 25.9km/h |
04 Hydraulic Specification
| Pump Type | Axial-piston, PCLS system | |
|---|---|---|
| Pump Flow Capacity | 43gal/min | 163L/min |
| Relief Valve Pressure | 3625psi | 25000kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.5ft in | 3810mm |
|---|---|---|
| Reach From Swivel - Std | 19.68ft in | 5990mm |
| Dig Depth - Std | 15.83ft in | 4830mm |
| Reach At Load Height - Std | 23.33ft in | 7110mm |
| Bucket Dig Force - Std | 14801lb | 6713.63kg |
| Bucket Dig Force - Ext | 14801lb | 6713.63kg |
| Reach From Swivel - Ext | 23.67ft in | 7210mm |
| Dig Depth - Ext | 20.5ft in | 6100mm |
| Reach At Load Height - Ext | 27.33ft in | 8330mm |
| Load Height - Ext | 15.5ft in | 4720mm |
06 Dimensions Dimensions
| Transport Length | 23.92ft in | 7290mm |
|---|---|---|
| Transport Width | 7.55ft in | 2300mm |
| Transport Height | 12.83ft in | 3910mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 1.17ft in | 356mm |
| Height To Top Of Suspended Cab | 9.25ft in | 2820mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 12.33ft in | 3758.19mm |
|---|---|---|
| Reach At Max Dump Height | 2.96ft in | 902mm |
| Dig Depth | 4.2in | 107mm |
| Lift Capacity At Full Height | 7340lb | 3332kg |
| Bucket Capacity | 1.25yd3 | 0.96m3 |
| Bucket Width | 36in | 914mm |
| Bucket Breakout Force | 10210lb | 45.4kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.