Specification sheet Backhoe Loader Ref john-deere-410d-loader-backhoe

John Deere 410D

The John Deere 410D is a backhoe loader with an operating weight of 15,600 lb (7,075 kg), a 75 hp engine, a 1.26 yd³ (0.96 m³) bucket, and a dig depth of 15.33 ft (4,670 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
15,600lb
7,075kg
Engine power
75hp
55.93kW
Net Power
Bucket capacity
1.26yd³
0.96m³
Dig depth
15.33ft
4,670mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the John Deere 410D sits below the median for its class:

  • Engine power 75 hp less powerful than 66% (n=282)
  • Dig depth 15.3 ft deeper-digging than 68% (n=256)

Scale drawingdrawn to scale · mm

3481B330C7138A
Side elevation
3481B2340D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2240
Engine Model 4045T
Gross Power 85hp 63.4kw
Net Power 75hp 56kw
Power Measured @ 2200rpm
Torque Measured @ 1300rpm
Net Max Torque 224lb ft 303.8Nm
Aspiration Naturally aspirated or turbocharged
Displacement 276cu in 4.6L

02 Operational Specification

Fuel Capacity 34gal 129L
Max Weight 15600lb 7075kg
Hydraulic System Fluid Capacity 11gal 41L
Oil System Fluid Capacity 2.4gal 8.9L
Cooling System Fluid Capacity 4.3gal 16L
Transmission Fluid Capacity 11gal 41L
Front Axle Fluid Capacity 1.8gal 6.5L
Turning Radius 11.7ft in 3550mm
Tire Size Front - 2wd / 4wd 11-162PR F3F/12-16.58PR F3
Rear Tires Size 2wd/4wd 19.5-24 10PR R4
Operating Voltage 12V
Alternator Supplied Amperage 78amps

03 Transmission Specification

Transmission Type Fully synchronized, 4-speed with collar shift with hydraulic reverser
Number Of Forward Gears 4
Number Of Reverse Gears 4

04 Hydraulic Specification

Pump Type Naturally aspirated and turbocharged with static and dynamic timing

05 Backhoe Dimensions

Reach From Swivel - Std 18.43ft in 5610mm
Dig Depth - Std 15.33ft in 4670mm
Reach From Swivel - Ext 21.42ft in 6530mm
Dig Depth - Ext 18.43ft in 5610mm

06 Dimensions Dimensions

Transport Length 23.42ft in 7138.42mm
Transport Width 7.68ft in 2340mm
Transport Height 11.42ft in 3480.82mm
Wheelbase 6.89ft in 2100mm
Ground Clearance 1.09ft in 330mm

07 Loader Dimensions

Clearance At Max Dump Height 8.99ft in 2740mm
Reach At Max Dump Height 2.43ft in 739mm
Dig Depth 4.22in 107mm
Bucket Capacity 1.26yd3 0.96m3
Bucket Width 89.38in 2270mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.