Specification sheet Backhoe Loader Ref john-deere-410c-loader-backhoe
John Deere 410C
The John Deere 410C is a backhoe loader with an operating weight of 14,400 lb (6,550 kg), a 75 hp engine, a 1.25 yd³ (0.96 m³) bucket, and a dig depth of 15.33 ft (4,670 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,400lb
6,550kg
Engine power
75hp
55.93kW
Net Power Bucket capacity
1.25yd³
0.96m³
Dig depth
15.33ft
4,670mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 410C sits below the median for its class:
- Engine power 75 hp less powerful than 66% (n=282)
- Dig depth 15.3 ft deeper-digging than 68% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4276D | |
| Gross Power | 80hp | 59.7kw |
| Net Power | 75hp | 56kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1200rpm | |
| Net Torque Rise | 20% | |
| Net Max Torque | 215lb ft | 291.6Nm |
| Aspiration | naturally aspirated | |
| Displacement | 276cu in | 4.6L |
02 Operational Specification
| Fuel Capacity | 23gal | 87L |
|---|---|---|
| Max Weight | 14400lb | 6550kg |
| Hydraulic System Fluid Capacity | 21gal | 80L |
| Oil System Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Transmission Fluid Capacity | 21gal | 80L |
| Turning Radius | 11.7ft in | 3550mm |
| Tire Size Front - 2wd / 4wd | 11L-15,12PR F3;12.00-16.5,8PR | |
| Rear Tires Size 2wd/4wd | 17.5-24 10PR R4;19.5L-24,10PR R4/21L-24,10PR R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Transmission Specification
| Transmission Type | Manual shift with first and second speeds having sliding collar engagement and third and fourth speeds engaged with cone-type synchronizer. | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.1mph | 35.6km/h |
| Max Speed Reverse | 25.6mph | 41.2km/h |
04 Hydraulic Specification
| Pump Type | 8 radial pistons, variable flow | |
|---|---|---|
| Pump Flow Capacity | 35gal/min | 133L/min |
| Relief Valve Pressure | 2500psi | 17238kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.83ft in | 3610mm |
|---|---|---|
| Reach From Swivel - Std | 18.43ft in | 5610mm |
| Dig Depth - Std | 15.33ft in | 4670mm |
| Reach At Load Height - Std | 22.17ft in | 6760mm |
| Reach At Load Height - Ext | 25.17ft in | 7670mm |
| Bucket Dig Force - Ext | 11700lb | 5310kg |
| Bucket Dig Force - Std | 11700lb | 5310kg |
| Dig Depth - Ext | 18.43ft in | 5610mm |
| Load At Max Lift - Ext | 2700lb | 1220kg |
| Load At Max Lift - Std | 4100lb | 1860kg |
| Load Height - Ext | 13.92ft in | 4240mm |
| Reach From Swivel - Ext | 21.42ft in | 6530mm |
06 Dimensions Dimensions
| Transport Length | 23.42ft in | 7140mm |
|---|---|---|
| Transport Width | 7.68ft in | 2340mm |
| Transport Height | 11.83ft in | 3610mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 1.01ft in | 305mm |
| Height To Top Of Suspended Cab | 8.67ft in | 2640mm |
07 Loader Dimensions
| Lift Capacity At Full Height | 5700lb | 2585kg |
|---|---|---|
| Bucket Width | 92in | 2340mm |
| Bucket Capacity | 1.25yd3 | 0.96m3 |
| Bucket Breakout Force | 8800lb | 3992kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.