Specification sheet Backhoe Loader Ref john-deere-410-loader-backhoe
John Deere 410
The John Deere 410 is a backhoe loader with a 62 hp engine, a 1.25 yd³ (0.96 m³) bucket, and a dig depth of 15.33 ft (4,670 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
62hp
46.24kW
Net Power Bucket capacity
1.25yd³
0.96m³
Dig depth
15.33ft
4,670mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 410 sits below the median for its class:
- Engine power 62 hp less powerful than 81% (n=282)
- Dig depth 15.3 ft deeper-digging than 68% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 300 Series | |
| Gross Power | 66hp | 49.3kw |
| Net Power | 62hp | 46.3kw |
| Power Measured @ | 2500rpm | |
| Torque Measured @ | 1300rpm | |
| Net Max Torque | 160lb ft | 217Nm |
| Displacement | 219cu in | 3.6L |
02 Operational Specification
| Fuel Capacity | 3.5gal | 13L |
|---|---|---|
| Hydraulic System Fluid Capacity | 20.5gal | 77.6L |
| Oil System Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 3.3gal | 12.3L |
| Transmission Fluid Capacity | 10gal | 37.8L |
| Turning Radius | 10.2ft in | 3100mm |
| Tire Size Front - 2wd / 4wd | 11L-16,10ply rating,F3/7.50/8.00-16,10ply rating,F3 | |
| Rear Tires Size 2wd/4wd | 16.9-24,8ply rating,R4/19.5L-24 8ply rating,R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 35amps |
03 Transmission Specification
| Transmission Type | Constant mesh, 8-speed forward and reverse.Standard hydraulic direction reverser permits no clutch reversing in all gears | |
|---|---|---|
| Number Of Forward Gears | 8 | |
| Number Of Reverse Gears | 8 | |
| Max Speed - Forward | 16.4mph | 26.4km/h |
| Max Speed Reverse | 18.7mph | 30.1km/h |
04 Hydraulic Specification
| Pump Type | Piston, constant pressure, variable displacement | |
|---|---|---|
| Relief Valve Pressure | 2350psi | 16203kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.75ft in | 3580mm |
|---|---|---|
| Dig Depth - Std | 15.33ft in | 4670mm |
| Reach At Load Height - Std | 21.92ft in | 6680mm |
| Dig Depth - Ext | 14.17ft in | 4320mm |
| Reach At Load Height - Ext | 21.92ft in | 6680mm |
| Load At Max Lift - Std | 1950lb | 884kg |
| Load Height - Ext | 11.58ft in | 3530mm |
| Load At Max Lift - Ext | 3300lb | 1497kg |
06 Dimensions Dimensions
| Transport Length | 23.75ft in | 7250mm |
|---|---|---|
| Transport Width | 10.17ft in | 3100mm |
| Transport Height | 11.75ft in | 3580mm |
| Height To Top Of Suspended Cab | 8.42ft in | 2560mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 10.75ft in | 3280mm |
|---|---|---|
| Reach At Max Dump Height | 2.75ft in | 838mm |
| Dig Depth | 4in | 102mm |
| Bucket Breakout Force | 7500lb | 33.62kN |
| Bucket Capacity | 1.25yd3 | 0.96m3 |
| Lift Capacity At Full Height | 5000lb | 2268kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.