John Deere 400
The John Deere 400 is a backhoe loader with an operating weight of 10,500 lb (4,762.72 kg), and a 59 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 400 sits below the median for its class:
- Engine power 59 hp less powerful than 82% (n=282)
Not positioned on dig depth — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | John Deere | |
| Net Power | 59hp | 44kw |
| Power Measured @ | 2500rpm | |
| Torque Measured @ | 1300rpm | |
| Net Max Torque | 145lb ft | 196.6Nm |
| Displacement | 201.4cu in | 3.3L |
| Bore | 3.9in | 98mm |
| Stroke | 4.3in | 109mm |
02 Operational Specification
| Fuel Capacity | 19.5gal | 73.9L |
|---|---|---|
| Max Weight | 10500lb | 4762.8kg |
| Hydraulic System Fluid Capacity | 10.8gal | 40.7L |
| Oil System Fluid Capacity | 1.8gal | 6.7L |
| Cooling System Fluid Capacity | 3.1gal | 11.4L |
| Tire Size Front - 2wd / 4wd | 7.50-16 | |
| Rear Tires Size 2wd/4wd | 13.6-28 | |
| Operating Voltage | 12V |
03 Transmission Specification
| Transmission Type | Constant mesh | |
|---|---|---|
| Number Of Forward Gears | 8 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 16.1mph | 25.9km/h |
| Max Speed Reverse | 4.8mph | 7.7km/h |
04 Hydraulic Specification
| Pump Type | Closed center | |
|---|---|---|
| Pump Flow Capacity | 28gal/min | 106L/min |
| Relief Valve Pressure | 2250psi | 15513.2kPa |
05 Dimensions Dimensions
| Transport Length | 10.57ft in | 3220mm |
|---|---|---|
| Transport Width | 6.21ft in | 1890mm |
| Wheelbase | 6.83ft in | 2080mm |
| Height To Top Of Suspended Cab | 6.67ft in | 2030mm |
| Front Wheel Tread Width | 55.91in | 1420mm |
| Rear Tread Range | 77.96in | 1980mm |
| Shipping Weight | 4720lb | 2140.96kg |
06 Loader Dimensions
| Clearance At Max Dump Height | 8.24ft in | 2510mm |
|---|---|---|
| Reach At Max Dump Height | 2.4ft in | 730mm |
| Bucket Breakout Force | 4000lb | 17.8kN |
| Lift Capacity At Full Height | 2500lb | 1133.99kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.