Specification sheet Wheel Loader Ref john-deere-324j-wheel-loader
John Deere 324J
The John Deere 324J is a wheel loader with a 1.44 yd³ (1.11 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Bucket capacity
1.44yd³
1.11m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
01 Engine Specification
| Number Of Cylinders | 5 | |
|---|---|---|
| Fuel System Control | Electronically controlled unit injection pump | |
| Engine Make | John Deere Power Tech | |
| Engine Model | 5030T | |
| Air Cleaner | Dual safety element dry type | |
| Max Torque | 195lb ft | 264.4Nm |
| Displacement | 177cu in | 2.9L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Voltage | 24V | |
|---|---|---|
| Alternator Supplied Amperage | 65amps | |
| Tire Size | 405/70R20 |
03 Hydraulic System Specification
| Pump Flow Capacity | 25.1gal/min | 95L/min |
|---|---|---|
| Raise Time | 5.3sec | |
| Dump Time | 1.6sec | |
| Lower Time | 4.5sec |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 2.91ft in | 884mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.44yd3 | 1.11m3 |
| Bucket Capacity - Struck | 1.18yd3 | 0.9m3 |
| Bucket Width | 7.22ft in | 2200mm |
| Breakout Force | 12364lb | 55kN |
05 Dimensions Dimensions
| Length With Bucket On Ground | 20.15ft in | 6140mm |
|---|---|---|
| Hinge Pin - Max Height | 10.47ft in | 3190mm |
| Reach At Max Lift And Dump | 1.87ft in | 569mm |
?Questions & answersfrom this machine's data
- What size bucket does a John Deere 324J wheel loader have?
- A John Deere 324J wheel loader has a bucket capacity of 1.4 yd³ (1.1 m³).
- How long is a John Deere 324J wheel loader?
- A John Deere 324J wheel loader has an overall length of 20.2 ft (6,140 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.