Specification sheet Backhoe Loader Ref john-deere-315sl-loader-backhoe

John Deere 315SL

The John Deere 315SL is a backhoe loader.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →

Where it sits in its classnot positioned

None of the positionable specs are published for this machine.

01 Engine Specification

Engine Output-Net 100hp 74.6kw
Battery 12
Engine Make John Deere
Engine Model PowerTech Plus 4045HT096
Rated Speed 2240rpm
Displacement 274.7cu in 4.5L

02 Capacities Specification

Fuel Tank 37gal 140.1L
Hydraulic Tank 11.9gal 45L
Stick Tearout 8228.1lb 36.6kN
Boom Lift - Maximum Reach - Non-Extending Dipper 2978.5lb 1351kg
4wd Front Axle 1.8gal 6.5L
Rear Axle 4.8gal 18L
Bucket Tearout - Non-Extending Dipper 12364.5lb 55kN
Shovel Breakout - General Purpose 10858.3lb 48.3kN
Lift To Full Height - General Purpose Shovel 7440.7lb 3375kg
Shovel Capacity - Standard General Purpose 1.1yd3 0.8m3

03 Transmission Specification

Transmission Type Powershift

04 Weights Specification

Operating Weights 18038.3lb 8182kg
Weight - 4wd, Gp, Std Stick 18038.3lb 8182kg

05 Hydraulic Specification

Pump Type Tandem Gear Pump
Pump Flow Capacity 36gal/min 136L/min

06 Brakes Specification

Actuation Hydraulic with Power Assist
Brakes Type Wet Multi Disc

07 Dimensions Dimensions

Wheelbase 7.19ft in 2190mm
Ground Clearance 1.16ft in 351mm
Dump Height 8.9ft in 2710mm
Dump Reach - General Purpose 28.9in 734mm
Height Over Ext Stick 3630 mm (11 ft 11 in)
Height Over Std Stick 11.91ft in 3630mm
Max Length With Ext. Stick 19.56ft in 5960mm
Max Length With Std. Stick 19.56ft in 5960mm
Shovel Pin Height - General Purpose 11.32ft in 3450mm
Bucket Rotation - Position 1 190
Width - General Purpose Shovel 2184 mm (7 ft 2 in) Heavy Duty
Digging Depth 4.18in 106mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.