Specification sheet Backhoe Loader Ref john-deere-315se-loader-backhoe
John Deere 315SE
The John Deere 315SE is a backhoe loader with an operating weight of 14,700 lb (6,670 kg), a 80 hp engine, a 1.3 yd³ (1 m³) bucket, and a dig depth of 14.08 ft (4,290 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,700lb
6,670kg
Engine power
80hp
59.66kW
Net Power Bucket capacity
1.3yd³
1m³
Dig depth
14.08ft
4,290mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 315SE sits in the middle of its class:
- Engine power 80 hp less powerful than 60% (n=282)
- Dig depth 14.1 ft shallower-digging than 75% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4045T | |
| Gross Power | 88hp | 65.7kw |
| Net Power | 80hp | 59.7kw |
| Power Measured @ | 2200rpm | |
| Net Torque Rise | 42% | |
| Net Max Torque | 271lb ft | 367.5Nm |
| Aspiration | Turbocharged | |
| Displacement | 276cu in | 4.6L |
02 Operational Specification
| Fuel Capacity | 36gal | 136L |
|---|---|---|
| Max Weight | 14700lb | 6670kg |
| Hydraulic System Fluid Capacity | 24gal | 91L |
| Oil System Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Transmission Fluid Capacity | 3.7gal | 14L |
| Front Axle Fluid Capacity | 2.3gal | 8.5L |
| Rear Axle Fluid Capacity | 3.5gal | 13L |
| Turning Radius | 11.8ft in | 3570mm |
| Tire Size Front - 2wd / 4wd | 11L-15,8PR F3/12.5/80-18,10PR | |
| Rear Tires Size 2wd/4wd | 16.9-24,8PR R4/19.5L-24,8PRR4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Transmission Specification
| Transmission Type | 4-speed, helical cut gear, collar shift transmission synchronized in all gears with hydraulic reverser | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 25.8mph | 41.5km/h |
| Max Speed Reverse | 28.8mph | 46.3km/h |
04 Hydraulic Specification
| Pump Type | Gear, open center | |
|---|---|---|
| Pump Flow Capacity | 36gal/min | 136.3L/min |
| Relief Valve Pressure | 3625psi | 25000kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.67ft in | 3560mm |
|---|---|---|
| Reach From Swivel - Std | 18.08ft in | 5560mm |
| Dig Depth - Std | 14.08ft in | 4290mm |
| Reach At Load Height - Std | 22.67ft in | 6910mm |
| Bucket Dig Force - Std | 11990lb | 5438.58kg |
| Bucket Dig Force - Ext | 12158lb | 5514.78kg |
| Reach From Swivel - Ext | 21.75ft in | 6630mm |
| Dig Depth - Ext | 18ft in | 5490mm |
| Reach At Load Height - Ext | 26.33ft in | 8030mm |
| Load Height - Ext | 14.25ft in | 4340mm |
06 Dimensions Dimensions
| Transport Length | 17.26ft in | 5260mm |
|---|---|---|
| Transport Width | 7.62ft in | 2320mm |
| Transport Height | 12.05ft in | 3670mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 1.15ft in | 350mm |
| Height To Top Of Suspended Cab | 9ft in | 2750mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.67ft in | 2640mm |
|---|---|---|
| Reach At Max Dump Height | 2.51ft in | 765mm |
| Dig Depth | 8.1in | 206mm |
| Lift Capacity At Full Height | 7200lb | 3266kg |
| Bucket Capacity | 1.3yd3 | 1m3 |
| Bucket Width | 92in | 2340mm |
| Bucket Breakout Force | 8900lb | 39.6kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.