Specification sheet Backhoe Loader Ref john-deere-310sl-loader-backhoe

John Deere 310SL

The John Deere 310SL is a backhoe loader.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →

Where it sits in its classnot positioned

None of the positionable specs are published for this machine.

01 Engine Specification

Engine Output-Net 101hp 75.4kw
Battery 12
Engine Make John Deere
Engine Model PowerTech Plus 4045HT096
Rated Speed 2244rpm
Displacement 274.7cu in 4.5L

02 Capacities Specification

Fuel Tank 37gal 140.1L
Hydraulic Tank 11.9gal 45L
Stick Tearout 8228.1lb 36.6kN
Boom Lift - Maximum Reach - Non-Extending Dipper 2905.7lb 1318kg
4wd Front Axle 1.8gal 6.5L
Rear Axle 4.8gal 18L
Bucket Tearout - Non-Extending Dipper 12364.5lb 55kN
Shovel Breakout - General Purpose 11038.2lb 49.1kN
Lift To Full Height - General Purpose Shovel 7632.5lb 3462kg
Shovel Capacity - Standard General Purpose 1.2yd3 0.9m3

03 Transmission Specification

Transmission Type Powershift

04 Weights Specification

Operating Weights 15871.1lb 7199kg
Weight - 4wd, Gp, Std Stick 16356.1lb 7419kg

05 Hydraulic Specification

Pump Type Tandem Gear Pump
Pump Flow Capacity 36gal/min 136L/min

06 Brakes Specification

Actuation Hydraulic with Power Assist
Brakes Type Wet Multi Disc

07 Dimensions Dimensions

Wheelbase 7.19ft in 2190mm
Ground Clearance 1.09ft in 330mm
Dump Height 8.6ft in 2620mm
Dump Reach - General Purpose 27.52in 699mm
Height Over Ext Stick 3500 mm (11 ft 6 in)
Height Over Std Stick 11.46ft in 3490mm
Max Length With Std. Stick 23.89ft in 7280mm
Shovel Pin Height - General Purpose 11.32ft in 3450mm
Width - General Purpose Shovel 2184 mm (7 ft 2 in)
Bucket Rotation - Position 1 190
Width Over Tires 7.16ft in 2180mm
Digging Depth 4.18in 106mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.