Specification sheet Backhoe Loader Ref john-deere-310se-loader-backhoe
John Deere 310SE
The John Deere 310SE is a backhoe loader with an operating weight of 13,500 lb (6,123 kg), a 80 hp engine, a 1.3 yd³ (1 m³) bucket, and a dig depth of 14.5 ft (4,420 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,500lb
6,123kg
Engine power
80hp
60kW
Net Power Bucket capacity
1.3yd³
1m³
Dig depth
14.5ft
4,420mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 310SE sits in the middle of its class:
- Engine power 80 hp less powerful than 60% (n=282)
- Dig depth 14.5 ft shallower-digging than 55% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2240 | |
|---|---|---|
| Engine Model | 4045T | |
| Gross Power | 88hp | 66kw |
| Net Power | 80hp | 60kw |
| Power Measured @ | 2200rpm | |
| Net Torque Rise | 42% | |
| Net Max Torque | 271lb ft | 368Nm |
| Aspiration | Turbocharged | |
| Displacement | 276cu in | 4.6L |
02 Operational Specification
| Operating Weight 2wd | 13500lb | 6123kg |
|---|---|---|
| Fuel Capacity | 36gal | 136L |
| Operating Weight 4wd | 13500lb | 6123kg |
| Max Weight | 13500lb | 6123kg |
| Hydraulic System Fluid Capacity | 24gal | 91L |
| Oil System Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Transmission Fluid Capacity | 3.7gal | 14L |
| Front Axle Fluid Capacity | 2.3gal | 8.5L |
| Rear Axle Fluid Capacity | 3.5gal | 13L |
| Turning Radius | 11.8ft in | 3570mm |
| Tire Size Front - 2wd / 4wd | 11L-15,8PRF3;11L-16,12PR F3;12.5/80-18,10PR | |
| Rear Tires Size 2wd/4wd | 16.9-24,8PR R4;19.5L-24,8PR R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Transmission Specification
| Transmission Type | 4-speed , helical cut gear, collar shift transmission synchronized in all gears with hydraulic reverser | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.4mph | 39.3km/h |
| Max Speed Reverse | 27.2mph | 43.8km/h |
04 Hydraulic Specification
| Pump Type | Gear, tandem with unloader | |
|---|---|---|
| Pump Flow Capacity | 36gal/min | 136.3L/min |
| Relief Valve Pressure | 3000psi | 20700kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.25ft in | 3430mm |
|---|---|---|
| Reach From Swivel - Std | 18.25ft in | 5560mm |
| Dig Depth - Std | 14.5ft in | 4420mm |
| Reach At Load Height - Std | 21.75ft in | 6630mm |
| Reach At Load Height - Ext | 25.33ft in | 7720mm |
| Dig Depth - Ext | 18.43ft in | 5610mm |
| Bucket Dig Force - Ext | 12158lb | 5514.78kg |
| Bucket Dig Force - Std | 11990lb | 5438.58kg |
| Reach From Swivel - Ext | 21.92ft in | 6680mm |
| Load Height - Ext | 14.08ft in | 4290mm |
06 Dimensions Dimensions
| Transport Length | 23.5ft in | 7160mm |
|---|---|---|
| Transport Width | 7.16ft in | 2180mm |
| Transport Height | 11.52ft in | 3510mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 1.09ft in | 330mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 11.17ft in | 3400mm |
|---|---|---|
| Reach At Max Dump Height | 2.99ft in | 911mm |
| Dig Depth | 7.3in | 185mm |
| Bucket Breakout Force | 8325lb | 37kN |
| Bucket Width | 92in | 2340mm |
| Bucket Capacity | 1.3yd3 | 1m3 |
| Lift Capacity At Full Height | 5900lb | 2676kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.