Specification sheet Backhoe Loader Ref john-deere-310l-loader-backhoe

John Deere 310L

The John Deere 310L is a backhoe loader.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →

Where it sits in its classnot positioned

None of the positionable specs are published for this machine.

01 Engine Specification

Engine Output-Net 93hp 69.4kw
Battery 12
Engine Make John Deere
Engine Model PowerTech Plus 4045HT096
Rated Speed 2200rpm
Displacement 274.7cu in 4.5L

02 Capacities Specification

Fuel Tank 34gal 128.7L
Hydraulic Tank 11.9gal 45L
Stick Tearout 6991.6lb 31.1kN
Boom Lift - Maximum Reach - Non-Extending Dipper 2339.2lb 1061kg
4wd Front Axle 1.8gal 6.5L
Rear Axle 4.8gal 18L
Bucket Tearout - Non-Extending Dipper 10835.8lb 48.2kN
Shovel Breakout - General Purpose 9352.1lb 41.6kN
Lift To Full Height - General Purpose Shovel 6435.3lb 2919kg
Shovel Capacity - Standard General Purpose 1.1yd3 0.8m3

03 Transmission Specification

Transmission Type Powershift

04 Weights Specification

Operating Weights 15040lb 6822kg
Weight - 4wd, Gp, Std Stick 15040lb 6822kg

05 Hydraulic Specification

Pump Type Gear Type Pump
Pump Flow Capacity 28.1gal/min 106L/min

06 Brakes Specification

Actuation Hydraulic with Power Assist
Brakes Type Wet Multi Disc

07 Dimensions Dimensions

Wheelbase 7.19ft in 2190mm
Ground Clearance 0.97ft in 293mm
Dump Height 8.99ft in 2740mm
Dump Reach - General Purpose 27.64in 702mm
Height Over Ext Stick 3420 mm (11 ft 2 in)
Height Over Std Stick 11.23ft in 3420mm
Max Length With Std. Stick 23.76ft in 7240mm
Shovel Pin Height - General Purpose 11.42ft in 3480mm
Width - General Purpose Shovel 2184 mm (7 ft 2 in)
Bucket Rotation - Position 1 190
Width Over Tires 7.22ft in 2200mm
Digging Depth 2.76in 70mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.