Specification sheet Backhoe Loader Ref john-deere-310k-loader-backhoe
John Deere 310K
The John Deere 310K is a backhoe loader with an operating weight of 13,993 lb (6,347.12 kg), a 87 hp engine, and a 1 yd³ (0.77 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,993lb
6,347.12kg
Engine power
87hp
64.88kW
Net Power Bucket capacity
1yd³
0.77m³
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 310K sits in the middle of its class:
- Engine power 87 hp more powerful than 52% (n=282)
Not positioned on dig depth — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2240 | |
|---|---|---|
| Engine Model | PowerTech E4045HTO86 | |
| Net Power | 87hp | 64.9kw |
| Power Measured @ | 2000rpm | |
| Net Torque Rise | 43% | |
| Displacement | 4.5cu in | 0.1L |
02 Operational Specification
| Fuel Capacity | 41gal | 155.2L |
|---|---|---|
| Max Weight | 13993lb | 6347.2kg |
| Hydraulic System Fluid Capacity | 23.6gal | 89.3L |
| Oil System Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 8.7gal | 32.9L |
| Operating Voltage | 12V |
03 Hydraulic Specification
| Pump Type | Open center, single gear | |
|---|---|---|
| Pump Flow Capacity | 28gal/min | 106L/min |
| Relief Valve Pressure | 3625psi | 24993kPa |
04 Dimensions Dimensions
| Transport Length | 23.27ft in | 7090mm |
|---|---|---|
| Transport Width | 7.16ft in | 2180mm |
| Transport Height | 8.99ft in | 2740mm |
| Ground Clearance | 1.01ft in | 305mm |
| Height To Top Of Suspended Cab | 8.99ft in | 2740mm |
05 Loader Dimensions
| Clearance At Max Dump Height | 8.83ft in | 2690mm |
|---|---|---|
| Reach At Max Dump Height | 2.58ft in | 785mm |
| Lift Capacity At Full Height | 6600lb | 2993.71kg |
| Bucket Breakout Force | 9352.06lb | 41.6kN |
| Bucket Width | 86in | 2184.4mm |
| Bucket Capacity | 1yd3 | 0.77m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.