Specification sheet Backhoe Loader Ref john-deere-310g-loader-backhoe

John Deere 310G

The John Deere 310G is a backhoe loader with an operating weight of 15,090 lb (6,845 kg), a 73 hp engine, a 1 yd³ (0.76 m³) bucket, and a dig depth of 14.25 ft (4,340 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
15,090lb
6,845kg
Engine power
73hp
54.44kW
Net Power
Bucket capacity
1yd³
0.76m³
Dig depth
14.25ft
4,340mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the John Deere 310G sits below the median for its class:

  • Engine power 73 hp less powerful than 68% (n=282)
  • Dig depth 14.3 ft shallower-digging than 69% (n=256)

Scale drawingdrawn to scale · mm

3400B305C7090A
Side elevation
3400B2180D
Front elevation

01 Engine Specification

Engine Make 2240
Engine Model 4045D
Gross Power 78hp 58.2kw
Net Power 73hp 54.5kw
Power Measured @ 2000rpm
Torque Measured @ 1000rpm
Net Torque Rise 28%
Net Max Torque 216lb ft 292.9Nm
Aspiration Naturally Aspirated

02 Operational Specification

Operating Weight 2wd 12800lb 5806kg
Fuel Capacity 36gal 136L
Operating Weight 4wd 12800lb 5806kg
Max Weight 15090lb 6845kg
Hydraulic System Fluid Capacity 24gal 91L
Oil System Fluid Capacity 2.3gal 8.5L
Cooling System Fluid Capacity 4.3gal 16L
Transmission Fluid Capacity 4gal 15L
Front Axle Fluid Capacity 2gal 7.6L
Rear Axle Fluid Capacity 4.2gal 16L
Turning Radius 11.8ft in 3570mm
Tire Size Front - 2wd / 4wd 11L-15,8PR F3;12.5/80,12PR
Rear Tires Size 2wd/4wd 16.9-24,8PR R4;19.5L-24,8PR R4
Operating Voltage 12V
Alternator Supplied Amperage 65amps

03 Transmission Specification

Transmission Type 4-speed helical cut gear, collar shift transmission synchronized in all gears with hydraulic reverser
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 20.5mph 33km/h
Max Speed Reverse 20.5mph 33km/h

04 Hydraulic Specification

Pump Type Gear
Pump Flow Capacity 28gal/min 106L/min
Relief Valve Pressure 2900psi 20000kPa

05 Backhoe Dimensions

Load Height - Std 10.92ft in 3330mm
Reach From Swivel - Std 17.83ft in 5440mm
Dig Depth - Std 14.25ft in 4340mm
Load Height - Ext 13.92ft in 4240mm
Dig Depth - Ext 17.93ft in 5460mm
Bucket Dig Force - Std 11106lb 5037.6kg
Reach From Swivel - Ext 21.42ft in 6530mm

06 Dimensions Dimensions

Transport Length 23.25ft in 7090mm
Transport Width 7.16ft in 2180mm
Transport Height 11.16ft in 3400mm
Wheelbase 6.89ft in 2100mm
Ground Clearance 1.01ft in 305mm
Height To Top Of Suspended Cab 9ft in 2740mm

07 Loader Dimensions

Reach At Max Dump Height 2.58ft in 785mm
Dig Depth 6.3in 160mm
Lift Capacity At Full Height 6200lb 2812kg
Bucket Capacity 1yd3 0.76m3
Bucket Breakout Force 8500lb 38kN

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.