Specification sheet Backhoe Loader Ref john-deere-310-loader-backhoe
John Deere 310
The John Deere 310 is a backhoe loader with an operating weight of 22,447 lb (10,181.8 kg), a 70.3 hp engine, and a dig depth of 16.98 ft (5,173.98 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,447lb
10,181.8kg
Engine power
70.3hp
52.43kW
Net Power Dig depth
16.98ft
5,173.98mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 310 sits below the median for its class:
- Engine power 70 hp less powerful than 71% (n=282)
- Dig depth 17 ft deeper-digging than 91% (n=256)
◇Scale drawingdrawn to scale · mm
01 Swing System Specification
| Machine Swing Speed | 10.6rpm |
|---|
02 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 300 Series | |
| Net Power | 70.3hp | 52.5kw |
| Power Measured @ | 2500rpm | |
| Torque Measured @ | 1300rpm | |
| Net Max Torque | 129lb ft | 175Nm |
| Aspiration | naturally aspirataed | |
| Displacement | 203cu in | 3.4L |
| Bore | 3.7in | 94mm |
| Stroke | 4.7in | 119.4mm |
| Engine Model | Cat C3.3B | |
| Gross Power - Iso 14396 | 74.3hp | 55.5kw |
| Rated Net Power - 2,200 Rpm - U.S. Epa Tier 4 Final - Iso 9249/Eec 80/1269 | 70.3hp | 52.5kw |
| Rated Net Power - 2,200 Rpm - Eu Stage V - Iso 9249/Eec 80/1269 | 71.5hp | 53.4kw |
03 Operational Specification
| Fuel Capacity | 19.5gal | 73.9L |
|---|---|---|
| Hydraulic System Fluid Capacity | 8.5gal | 32.2L |
| Transmission Fluid Capacity | 20.5gal | 77.7L |
| Tire Size Front - 2wd / 4wd | 7.50-16 | |
| Rear Tires Size 2wd/4wd | 16.9-24 |
04 Transmission Specification
| Transmission Type | Collar Shift | |
|---|---|---|
| Number Of Forward Gears | 8 | |
| Number Of Reverse Gears | 4 |
05 Weights Specification
| Operating Weight | 22447lb | 10181.8kg |
|---|---|---|
| Note (1) | *Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, long stick, blade and no bucket. | |
| Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. | |
| Minimum Operating Weight With Cab* | 21166lb | 9600.8kg |
| Maximum Operating Weight With Cab** | 22447lb | 10181.8kg |
06 Blade Specification
| Height | 17in | 431.8mm |
|---|
07 Hydraulic Specification
| Pump Flow Capacity | 23gal/min | 87.1L/min |
|---|---|---|
| Relief Valve Pressure | 500psi | 3447.4kPa |
08 Hydraulic System Specification
| Hydraulic System Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | |
|---|---|---|
| Operating Pressure - Swing | 3336 psi | |
| Operating Pressure - Equipment | 4134 psi | |
| Operating Pressure - Travel | 4134 psi | |
| Digging Force - Bucket | 17459lb | 7919.3kg |
| Pump Flow At 2,400 Rpm | 62 gal/min | |
| Auxiliary Circuit - Primary - Flow | 35 gal/min | |
| Auxiliary Circuit - Primary - Pressure | 4134 psi | |
| Auxiliary Circuit - Secondary - Flow | 9 gal/min | |
| Auxiliary Circuit - Secondary - Pressure | 4134 psi |
09 Blade Specification
| Width - Standard | 97.2in | 2468.9mm |
|---|---|---|
| Width - Wide | 103.9in | 2639.1mm |
10 Hydraulic System Specification
| Digging Force - Stick | 11060lb | 5016.8kg |
|---|
11 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 38gal | 143.9L |
| Hydraulic Tank | 14gal | 53L |
| Hydraulic System | 37gal | 140.1L |
| Engine Oil | 3gal | 11.4L |
12 Sound Specification
| Note | European Union Directive 2000/14/EC | |
|---|---|---|
| Average Exterior Sound Pressure (Iso 6395:2008) | 99 dB(A) | |
| Operator Sound Pressure (Iso 6396:2008) | 72 dB(A) |
13 Travel System Specification
| Maximum Traction Force - High Speed | 6497lb | 2947kg |
|---|---|---|
| Maximum Traction Force - Low Speed | 19064lb | 8647.3kg |
| Travel Speed - High | 3.1mph | 5km/h |
| Travel Speed - Low | 1.6mph | 2.6km/h |
| Gradeability - Maximum | 30 degrees | |
| Ground Pressure - Minimum Weight | 6 psi | |
| Ground Pressure - Maximum Weight | 6 psi |
14 Weight Increase From Minimum Configuration Specification
| Counterweight | 552lb | 250.4kg |
|---|---|---|
| Steel Tracks With Pads | 728lb | 330.3kg |
15 Certification - Cab Specification
| Roll Over Protective Structure (Rops) | ISO 12117-2:2008 | |
|---|---|---|
| Tip Over Protective Structure (Tops) | ISO 12117:1997 | |
| Top Guard | ISO 10262:1998 (Level II) |
16 Dimensions Dimensions
| Transport Length | 10.01ft in | 3050mm |
|---|---|---|
| Dig Depth | 203.7in | 5173.98mm |
| Transport Width | 6.24ft in | 1900mm |
| Transport Height | 9.5ft in | 2893.06mm |
| Ground Clearance | 1.3ft in | 393.7mm |
| Maximum Blade Height | 15.5in | 393.7mm |
| Maximum Dump Clearance | 231in | 5867.4mm |
| Overall Shipping Length | 259in | 6578.6mm |
| Overall Track Width | 97.2in | 2468.88mm |
| Overall Undercarriage Length | 129.9in | 3299.46mm |
| Stick Length | 98.4in | 2499.36mm |
| Swing Bearing Height | 33in | 838.2mm |
| Tail Swing With Counterweight | 78.5in | 1993.9mm |
| Tail Swing Without Counterweight | 70.91in | 1800.86mm |
| Track Belt/Shoe Width | 17.7in | 449.58mm |
| Boom In Reach | 89.5in | 2273.31mm |
| Vertical Wall | 190.4in | 4836.16mm |
| Boom Swing Left | _- | |
| Boom Swing Right | _- | |
| Cab Height | 8.61ft in | 2623.82mm |
| Maximum Blade Depth | 25in | 635mm |
?Questions & answersfrom this machine's data
- What engine does a John Deere 310 backhoe loader have?
- A John Deere 310 backhoe loader is powered by a 300 Series engine producing 70.3 hp (52.4 kW).
- How deep can a John Deere 310 backhoe loader dig?
- A John Deere 310 backhoe loader has a maximum dig depth of 17 ft (5,174 mm).
- How much fuel does a John Deere 310 backhoe loader hold?
- A John Deere 310 backhoe loader has a fuel capacity of 19.5 gal (73.9 L).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.