Specification sheet Backhoe Loader Ref john-deere-302a-loader-backhoe

John Deere 302A

The John Deere 302A is a backhoe loader with an operating weight of 6,261.13 lb (2,840 kg), a 50 hp engine, and a dig depth of 13.65 ft (4,160 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,261.13lb
2,840kg
Engine power
50hp
37.29kW
Net Power
Dig depth
13.65ft
4,160mm

◆Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the John Deere 302A sits at the compact end of its class:

  • Engine power 50 hp less powerful than 87% (n=282)
  • Dig depth 13.7 ft shallower-digging than 82% (n=256)

◇Scale drawingdrawn to scale · mm

2300B300C4670A
Side elevation
2300B1900D
Front elevation

Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).

01 Engine Specification

Number Of Cylinders 3
Engine Make John Deere
Gross Power 52hp 38.8kw
Net Power 50hp 37.3kw
Power Measured @ 2500rpm
Torque Measured @ 1300rpm
Net Max Torque 129lb ft 175Nm
Displacement 164.8cu in 2.7L
Bore 4.1in 102mm
Stroke 4.4in 110mm

02 Operational Specification

Fuel Capacity 19.5gal 73.9L
Max Weight 6261.2lb 2840kg
Hydraulic System Fluid Capacity 10gal 37.9L
Oil System Fluid Capacity 2.3gal 8.5L
Cooling System Fluid Capacity 3.1gal 11.4L
Tire Size Front - 2wd / 4wd 11L-15
Rear Tires Size 2wd/4wd 14.9-24
Operating Voltage 12V
Alternator Supplied Amperage 35amps

03 Transmission Specification

Transmission Type Power shuttle
Number Of Forward Gears 8
Number Of Reverse Gears 8
Max Speed - Forward 15.8mph 25.3km/h
Max Speed Reverse 25.3mph 40.7km/h

04 Hydraulic Specification

Pump Type Closed center
Pump Flow Capacity 28gal/min 106L/min
Relief Valve Pressure 2350psi 16202.7kPa

05 Backhoe Dimensions

Load Height - Std 11.23ft in 3420mm
Reach From Swivel - Std 17.39ft in 5300mm
Dig Depth - Std 13.65ft in 4160mm
Bucket Dig Force - Std 7407.54lb 3360kg

06 Dimensions Dimensions

Transport Length 15.33ft in 4670mm
Transport Width 6.24ft in 1900mm
Wheelbase 6.4ft in 1950mm
Ground Clearance 0.99ft in 300mm
Height To Top Of Suspended Cab 7.55ft in 2300mm
Front Wheel Tread Width 61.82in 1570mm
Rear Tread Range 59.85in 1520mm

07 Loader Dimensions

Clearance At Max Dump Height 8.14ft in 2480mm
Reach At Max Dump Height 2.33ft in 710mm
Lift Capacity At Full Height 3300lb 1496.86kg
Bucket Width 81.11in 2060mm
Bucket Breakout Force 5000lb 22.25kN

?Questions & answersfrom this machine's data

What engine does a John Deere 302A backhoe loader have?
A John Deere 302A backhoe loader is powered by a John Deere engine producing 50 hp (37.3 kW).
How deep can a John Deere 302A backhoe loader dig?
A John Deere 302A backhoe loader has a maximum dig depth of 13.7 ft (4,160 mm).
How much fuel does a John Deere 302A backhoe loader hold?
A John Deere 302A backhoe loader has a fuel capacity of 19.5 gal (73.9 L).
How fast does a John Deere 302A backhoe loader travel?
A John Deere 302A backhoe loader has a maximum forward travel speed of 15.8 mph (25.3 km/h).

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.