Specification sheet Backhoe Loader Ref john-deere-300d-loader-backhoe
John Deere 300D
The John Deere 300D is a backhoe loader with an operating weight of 12,200 lb (5,533 kg), a 60 hp engine, a 1 yd³ (0.76 m³) bucket, and a dig depth of 13.83 ft (4,210 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,200lb
5,533kg
Engine power
60hp
45kW
Net Power Bucket capacity
1yd³
0.76m³
Dig depth
13.83ft
4,210mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 300D sits below the median for its class:
- Engine power 60 hp less powerful than 82% (n=282)
- Dig depth 13.8 ft shallower-digging than 81% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4039D | |
| Net Power | 60hp | 45kw |
| Gross Power | 63hp | 47kw |
| Power Measured @ | 2200rpm | |
| Net Max Torque | 172lb ft | 233Nm |
| Displacement | 239cu in | 4L |
02 Operational Specification
| Operating Weight 2wd | 12200lb | 5533kg |
|---|---|---|
| Fuel Capacity | 28gal | 106L |
| Operating Weight 4wd | 12200lb | 5533kg |
| Max Weight | 12200lb | 5533kg |
| Hydraulic System Fluid Capacity | 16gal | 60L |
| Oil System Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Transmission Fluid Capacity | 1.9gal | 7L |
| Turning Radius | 12ft in | 3670mm |
| Tire Size Front - 2wd / 4wd | 11L-15,8PR,I-1A;12-16.5,8PR | |
| Rear Tires Size 2wd/4wd | 16.9-24,8PR R4;17.5L-24,8PR R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 95amps |
03 Transmission Specification
| Transmission Type | 4-speed helical gear, synchronized collar shift with hydraulic reverser | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 20.1mph | 32.3km/h |
| Max Speed Reverse | 18mph | 29km/h |
04 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Pump Flow Capacity | 24gal/min | 91L/min |
| Relief Valve Pressure | 2700psi | 18620kPa |
05 Backhoe Dimensions
| Load Height - Std | 10.75ft in | 3290mm |
|---|---|---|
| Reach From Swivel - Std | 17.25ft in | 5250mm |
| Dig Depth - Std | 13.83ft in | 4210mm |
| Reach At Load Height - Std | 20.58ft in | 6280mm |
| Load Height - Ext | 12.75ft in | 3880mm |
| Bucket Dig Force - Ext | 10230lb | 4640.25kg |
| Bucket Dig Force - Std | 10230lb | 4640.25kg |
| Reach At Load Height - Ext | 24.25ft in | 7390mm |
| Load At Max Lift - Ext | 1390lb | 630kg |
| Load At Max Lift - Std | 2420lb | 1100kg |
| Reach From Swivel - Ext | 20.83ft in | 6360mm |
06 Dimensions Dimensions
| Transport Length | 22.5ft in | 6850mm |
|---|---|---|
| Transport Width | 7.55ft in | 2300mm |
| Transport Height | 12ft in | 3670mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 1.09ft in | 330mm |
| Height To Top Of Suspended Cab | 8.75ft in | 2660mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.83ft in | 2690mm |
|---|---|---|
| Reach At Max Dump Height | 2.5ft in | 760mm |
| Bucket Breakout Force | 6700lb | 27.1kN |
| Bucket Width | 84in | 2134mm |
| Bucket Capacity | 1yd3 | 0.76m3 |
| Lift Capacity At Full Height | 4630lb | 2100kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.