Specification sheet Backhoe Loader Ref john-deere-210l-loader-backhoe
John Deere 210L
The John Deere 210L is a backhoe loader with an operating weight of 11,325.2 lb (5,137 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,325.2lb
5,137kg
◆Where it sits in its classnot positioned
None of the positionable specs are published for this machine.
01 Engine Specification
| Emission Tier Level | Tier 4 | |
|---|---|---|
| Engine Output-Net | 93hp | 69.4kw |
| Pto Speed | 540rpm | |
| Engine Make | John Deere | |
| Engine Model | PowerTech Plus 4045HT082 | |
| Rated Speed | 2244rpm | |
| System Voltage | 12V | |
| Displacement | 274.7cu in | 4.5L |
02 Capacities Specification
| Fuel Tank - Diesel | 31gal | 117.3L |
|---|---|---|
| Hydraulic Tank | 11.9gal | 45L |
| Shovel 1 Capacity | 1.3yd3 | 1m3 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 19.7mph | 31.7km/h |
| Max Speed Reverse | 8.1mph | 12.9km/h |
| System Pressure | 2750psi | 18960.6kPa |
04 Weights Specification
| Operating Weight | 11325.2lb | 5137kg |
|---|
05 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Pump Flow Capacity | 25.4gal/min | 96L/min |
06 Axles Specification
| Front | Mechanical FWD |
|---|
07 Brakes Specification
| Actuation | Hydraulic w/Power Assist | |
|---|---|---|
| Brakes Type | Wet Multi Disc |
08 Dimensions Dimensions
| Transport Height- Minimum | 8.67ft in | 2.64m |
|---|---|---|
| Dump Clearance @ Full Height, 45° Dump: Bucket | 8.7ft in | 2.65m |
| Dump Reach - General Purpose | 29.02in | 737mm |
| Bucket Hinge Pin | 131.5in | 3340mm |
| Overall Length | 17.43ft in | 5310mm |
| Overall Width | 83.86in | 2130mm |
| Standard Shovel Width | 85.99in | 2184mm |
09 Loader Dimensions
| Lift Capacity At Full Height | 5436.6lb | 2466kg |
|---|
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.