Specification sheet Backhoe Loader Ref john-deere-210l-ep-loader-backhoe
John Deere 210L EP
The John Deere 210L EP is a backhoe loader with an operating weight of 10,569 lb (4,794 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,569lb
4,794kg
◆Where it sits in its classnot positioned
None of the positionable specs are published for this machine.
01 Engine Specification
| Emission Tier Level | Interim Tier 4 | |
|---|---|---|
| Engine Output-Net | 70hp | 52.2kw |
| Engine Make | John Deere | |
| Engine Model | PowerTech E 4045HT072 | |
| Rated Speed | 1900rpm | |
| System Voltage | 12V | |
| Displacement | 274.7cu in | 4.5L |
02 Capacities Specification
| Fuel Tank - Diesel | 31gal | 117.3L |
|---|---|---|
| Hydraulic Tank | 11.9gal | 45L |
| Alternator Output | 90amps | |
| Shovel 1 Capacity | 1.2yd3 | 0.9m3 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 19.7mph | 31.7km/h |
| Max Speed Reverse | 8.1mph | 12.9km/h |
| System Pressure | 2750psi | 18960.6kPa |
04 Weights Specification
| Operating Weight | 10569lb | 4794kg |
|---|
05 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Pump Flow Capacity | 20.7gal/min | 78L/min |
06 Axles Specification
| Front | Mechanical FWD |
|---|
07 Brakes Specification
| Actuation | Hydraulic with Power Assist | |
|---|---|---|
| Brakes Type | Wet Multi Disc |
08 Dimensions Dimensions
| Transport Height- Minimum | 8.6ft in | 2.62m |
|---|---|---|
| Dump Clearance @ Full Height, 45° Dump: Bucket | 8.99ft in | 2.74m |
| Dump Reach - General Purpose | 27.52in | 699mm |
| Bucket Hinge Pin | 131.5in | 3340mm |
| Overall Length | 17.43ft in | 5310mm |
| Overall Width | 83.86in | 2130mm |
| Standard Shovel Width | 85.99in | 2184mm |
09 Loader Dimensions
| Lift Capacity At Full Height | 5436.6lb | 2466kg |
|---|
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.