Specification sheet Backhoe Loader Ref john-deere-210c-loader-backhoe
John Deere 210C
The John Deere 210C is a backhoe loader with an operating weight of 10,500 lb (4,723 kg), a 55 hp engine, a 1 yd³ (0.76 m³) bucket, and a dig depth of 13.75 ft (4,190 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,500lb
4,723kg
Engine power
55hp
41.02kW
Net Power Bucket capacity
1yd³
0.76m³
Dig depth
13.75ft
4,190mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 210C sits below the median for its class:
- Engine power 55 hp less powerful than 84% (n=282)
- Dig depth 13.8 ft shallower-digging than 82% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4-239D | |
| Net Power | 55hp | 41.1kw |
| Gross Power | 58hp | 43.3kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1200rpm | |
| Net Torque Rise | 20% | |
| Net Max Torque | 158lb ft | 214.3Nm |
| Aspiration | Naturally aspirated | |
| Displacement | 239cu in | 4L |
02 Operational Specification
| Operating Weight 2wd | 10500lb | 4723kg |
|---|---|---|
| Fuel Capacity | 23gal | 87L |
| Operating Weight 4wd | 10500lb | 4723kg |
| Max Weight | 10500lb | 4723kg |
| Hydraulic System Fluid Capacity | 16gal | 60L |
| Oil System Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Transmission Fluid Capacity | 1.9gal | 7L |
| Tire Size Front - 2wd / 4wd | 7.50-16,10PR,F3;11L-15,8PR,I-1A/12.00-16.5,8PR,R4 | |
| Rear Tires Size 2wd/4wd | 14.9-24,6PR,R4;16.9-24,6PR,R3;17.5L-24,8PR,R4/16.9-24,8PR,R4 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 51amps |
03 Transmission Specification
| Transmission Type | Manual shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.4mph | 36.1km/h |
| Max Speed Reverse | 22.3mph | 35.9km/h |
04 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Relief Valve Pressure | 2500psi | 17238kPa |
05 Backhoe Dimensions
| Load Height - Std | 10.42ft in | 3180mm |
|---|---|---|
| Reach From Swivel - Std | 17.25ft in | 5250mm |
| Dig Depth - Std | 13.75ft in | 4190mm |
| Dig Depth - Ext | 17.68ft in | 5390mm |
| Load At Max Lift - Std | 2400lb | 1090kg |
| Bucket Dig Force - Ext | 9600lb | 4355kg |
| Bucket Dig Force - Std | 9600lb | 4355kg |
| Reach From Swivel - Ext | 20.9ft in | 6380mm |
| Load At Max Lift - Ext | 1370lb | 620kg |
| Load Height - Ext | 12.33ft in | 3760mm |
06 Dimensions Dimensions
| Transport Length | 23ft in | 7010mm |
|---|---|---|
| Transport Width | 7.55ft in | 2300mm |
| Transport Height | 10.42ft in | 3180mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 0.93ft in | 282mm |
| Height To Top Of Suspended Cab | 8.5ft in | 2600mm |
07 Loader Dimensions
| Reach At Max Dump Height | 2.42ft in | 737mm |
|---|---|---|
| Dig Depth | 1in | 25mm |
| Bucket Breakout Force | 6800lb | 30.1kN |
| Bucket Width | 89in | 2260mm |
| Bucket Capacity | 1yd3 | 0.76m3 |
| Lift Capacity At Full Height | 4700lb | 2140kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.