Specification sheet Backhoe Loader Ref john-deere-110-tlb-loader-backhoe
John Deere 110 TLB
The John Deere 110 TLB is a backhoe loader with an operating weight of 7,279.67 lb (3,302 kg), a 41 hp engine, and a dig depth of 10.09 ft (3,073 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,279.67lb
3,302kg
Engine power
41hp
30.58kW
Net Power Dig depth
10.09ft
3,073mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the John Deere 110 TLB sits at the compact end of its class:
- Engine power 41 hp less powerful than 93% (n=282)
- Dig depth 10.1 ft shallower-digging than 89% (n=256)
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | TNV88 | |
| Gross Power | 43hp | 32.1kw |
| Net Power | 41hp | 30.6kw |
| Power Measured @ | 2600rpm | |
| Displacement | 133.6cu in | 2.2L |
02 Operational Specification
| Fuel Capacity | 15.4gal | 58L |
|---|---|---|
| Max Weight | 7279.7lb | 3302kg |
| Hydraulic System Fluid Capacity | 15.1gal | 57L |
| Oil System Fluid Capacity | 1.3gal | 4.9L |
| Cooling System Fluid Capacity | 2.4gal | 9L |
| Transmission Fluid Capacity | 15.1gal | 57L |
| Front Axle Fluid Capacity | 1.3gal | 4.9L |
| Turning Radius | 11.8ft in | 3568mm |
| Tire Size Front - 2wd / 4wd | 10 x 16.5, 8 PR | |
| Rear Tires Size 2wd/4wd | 17.5L x 24, 8 PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps |
03 Hydraulic Specification
| Pump Type | Open Center | |
|---|---|---|
| Pump Flow Capacity | 23.6gal/min | 89.4L/min |
| Relief Valve Pressure | 3000psi | 20684.3kPa |
04 Backhoe Dimensions
| Load Height - Std | 8.43ft in | 2567mm |
|---|---|---|
| Dig Depth - Std | 10.09ft in | 3073mm |
05 Dimensions Dimensions
| Wheelbase | 5.96ft in | 1815mm |
|---|
06 Loader Dimensions
| Bucket Width | 72.01in | 1829mm |
|---|
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.