Specification sheet Wheel Loader Ref jcb-tm180-wheel-loader
JCB TM180
The JCB TM180 is a wheel loader with a 64 hp engine, and a 1.05 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
64hp
47.73kW
Gross Power Bucket capacity
1.05yd³
0.8m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Capacity | 0.7gal | 2.5L |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Model | JCB Diesel by Kohler - KDI 2504 TCR | |
| Engine Type | 4 stroke, Electronic Common Rail | |
| Gross Power | 64hp | 47.8kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 300 | |
| Aspiration | Turbocharged | |
| Emission Level | Stage 3B & T4F |
02 Capacities Specification
| Hydraulic Oil Tank | 18.5gal | 70L |
|---|---|---|
| Fuel Tank | 21.2gal | 80L |
| Engine Oil | 3gal | 11.2L |
03 Electrical Specification
| Alternator | 80 Amp hour | |
|---|---|---|
| Battery Capacity | 100 Amp hour |
04 Transmission Specification
| Model | Rexroth A6VM - 2 speed | |
|---|---|---|
| Transmission Type | Hydrostatic | |
| Max Speed - Forward | 12.5mph | 20km/h |
05 Weights Specification
| Total Weight- Maximum | 13190.3lb | 5983kg |
|---|---|---|
| Front Axle Weight | 6007.6lb | 2725kg |
| Rear Axle Weight | 7182.7lb | 3258kg |
06 Hydraulic System Specification
| Max Operating Pressure | 230 bar |
|---|
07 Axles Specification
| Axle Oil Front | 1.2gal | 4.4L |
|---|---|---|
| Axle Oil Rear | 1.6gal | 6.1L |
| Axles Type | Straight beam | |
| Make And Model | Dana 111 |
08 Hydraulic System Specification
| Pump Flow Capacity | 17gal/min | 64L/min |
|---|---|---|
| Pump Type | Single Gear Pump |
09 Bucket Dimensions
| Bucket Capacity - Heaped | 1.05yd3 | 0.8m3 |
|---|---|---|
| Bucket Width | 6.07ft in | 1850mm |
10 Dimensions Dimensions
| Ground Clearance | 1.01ft in | 307mm |
|---|---|---|
| Width Over Tires | 5.75ft in | 1752mm |
| Height To Top Of Cab | 8.17ft in | 2490mm |
| Wheelbase | 7.22ft in | 2200mm |
| Hinge Pin - Max Height | 15.43ft in | 4703mm |
| Overall Length | 19.7ft in | 6003mm |
| Turning Radius - Inside | 6.91ft in | 2105mm |
| Wheel Track | 54.97in | 1396mm |
| Axle To Pivot Pin | 48.71in | 1237mm |
| Width Over Cab | 57.8in | 1468mm |
| Center Of Front Axle To Counterweight (Pusher) | 4.17ft in | 1268mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.