Specification sheet Backhoe Loader Ref jcb-mini-cx-loader-backhoe
JCB MINI CX
The JCB MINI CX is a backhoe loader with a 20 hp engine, a 0.3 yd³ (0.23 m³) bucket, and a dig depth of 8.34 ft (2,540 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
20hp
14.92kW
Net Power Bucket capacity
0.3yd³
0.23m³
Dig depth
8.34ft
2,540mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the JCB MINI CX sits at the compact end of its class:
- Engine power 20 hp less powerful than 100% (n=282)
- Dig depth 8.3 ft shallower-digging than 96% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Model | 103-10 | |
| Net Power | 20hp | 15kw |
| Gross Power | 20.5hp | 15.3kw |
| Power Measured @ | 2800rpm | |
| Torque Measured @ | 2800rpm | |
| Net Max Torque | 41.5lb ft | 56.3Nm |
| Aspiration | Naturally Aspirated | |
| Displacement | 58.3cu in | 1L |
02 Operational Specification
| Operating Weight 2wd | 3373lb | 1530kg |
|---|---|---|
| Fuel Capacity | 7.7gal | 29L |
| Hydraulic System Fluid Capacity | 14.1gal | 53L |
| Oil System Fluid Capacity | 1gal | 3.5L |
| Cooling System Fluid Capacity | 1gal | 3.7L |
| Rear Axle Fluid Capacity | 0.4gal | 1.5L |
| Turning Radius | 19.2ft in | 5842mm |
| Tire Size Front - 2wd / 4wd | 23x8.5-12 | |
| Rear Tires Size 2wd/4wd | 400/50-15 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 6.2mph | 10km/h |
| Max Speed Reverse | 3.7mph | 6km/h |
04 Hydraulic Specification
| Pump Type | fixed displacement pump | |
|---|---|---|
| Pump Flow Capacity | 8.5gal/min | 32L/min |
| Relief Valve Pressure | 2900psi | 19994.8kPa |
05 Backhoe Dimensions
| Load Height - Std | 6.3ft in | 1918mm |
|---|---|---|
| Reach From Swivel - Std | 12.28ft in | 3740mm |
| Dig Depth - Std | 8.34ft in | 2540mm |
| Reach At Load Height - Std | 6.65ft in | 2025mm |
06 Dimensions Dimensions
| Transport Length | 14.87ft in | 4530mm |
|---|---|---|
| Transport Width | 4.83ft in | 1470mm |
| Transport Height | 6.98ft in | 2125mm |
| Wheelbase | 5.12ft in | 1559mm |
| Height To Top Of Suspended Cab | 6.98ft in | 2125mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 5.69ft in | 1732mm |
|---|---|---|
| Reach At Max Dump Height | 3.5ft in | 1065mm |
| Dig Depth | 2.56in | 65mm |
| Lift Capacity At Full Height | 3444lb | 1562.18kg |
| Bucket Capacity | 0.3yd3 | 0.23m3 |
| Bucket Breakout Force | 3607lb | 16.05kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.