Specification sheet Backhoe Loader Ref jcb-icx-8ft-208s-loader-backhoe
JCB ICX 8FT (208S)
The JCB ICX 8FT (208S) is a backhoe loader with a 47 hp engine, a 0.3 yd³ (0.23 m³) bucket, and a dig depth of 8.37 ft (2,550 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
47hp
35.05kW
Net Power Bucket capacity
0.3yd³
0.23m³
Dig depth
8.37ft
2,550mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the JCB ICX 8FT (208S) sits at the compact end of its class:
- Engine power 47 hp less powerful than 89% (n=282)
- Dig depth 8.4 ft shallower-digging than 96% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | 404C-22 | |
| Net Power | 47hp | 35.1kw |
| Gross Power | 50hp | 37.3kw |
| Power Measured @ | 2800rpm | |
| Torque Measured @ | 2000rpm | |
| Net Max Torque | 104lb ft | 141.1Nm |
| Aspiration | Naturally aspirated | |
| Displacement | 134.3cu in | 2.2L |
02 Operational Specification
| Operating Weight 2wd | 6150lb | 2789.6kg |
|---|---|---|
| Fuel Capacity | 11.9gal | 45.1L |
| Hydraulic System Fluid Capacity | 11.9gal | 45.1L |
| Oil System Fluid Capacity | 1.3gal | 5L |
| Cooling System Fluid Capacity | 2.1gal | 8L |
| Tire Size Front - 2wd / 4wd | 7 x 15 | |
| Rear Tires Size 2wd/4wd | 7 x 15 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 50amps |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 1 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 7mph | 11.3km/h |
| Max Speed Reverse | 7mph | 11.3km/h |
04 Hydraulic Specification
| Pump Type | Hydrostatic | |
|---|---|---|
| Pump Flow Capacity | 12.4gal/min | 47L/min |
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.29ft in | 3440mm |
|---|---|---|
| Reach From Swivel - Std | 11.09ft in | 3380mm |
| Dig Depth - Std | 8.37ft in | 2550mm |
| Reach At Load Height - Std | 5.88ft in | 1790mm |
| Bucket Dig Force - Std | 4852.38lb | 2201kg |
06 Dimensions Dimensions
| Transport Length | 11.16ft in | 3400mm |
|---|---|---|
| Transport Width | 4.7ft in | 1430mm |
| Transport Height | 7.42ft in | 2260mm |
| Wheelbase | 3.52ft in | 1070mm |
| Ground Clearance | 0.86ft in | 260mm |
| Height To Top Of Suspended Cab | 7.29ft in | 2220mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 6.89ft in | 2100mm |
|---|---|---|
| Reach At Max Dump Height | 0.99ft in | 300mm |
| Dig Depth | 1.97in | 50mm |
| Lift Capacity At Full Height | 5290lb | 2399.51kg |
| Bucket Capacity | 0.3yd3 | 0.23m3 |
| Bucket Width | 56.3in | 1430mm |
| Bucket Breakout Force | 5179lb | 23.04kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.