Specification sheet Backhoe Loader Ref jcb-acx-loader-backhoe
JCB ACX
The JCB ACX is a backhoe loader with a 97.7 hp engine, a 1.57 yd³ (1.2 m³) bucket, and a dig depth of 18.15 ft (5,530 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
97.7hp
72.8kW
Gross Power Bucket capacity
1.57yd³
1.2m³
Dig depth
18.15ft
5,530mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the JCB ACX sits above the median for its class:
- Engine power 98 hp more powerful than 83% (n=282)
- Dig depth 18.1 ft deeper-digging than 98% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2257 | |
|---|---|---|
| Engine Model | 444 | |
| Gross Power | 97.7hp | 72.8kw |
02 Operational Specification
| Fuel Capacity | 42.3gal | 160L |
|---|---|---|
| Operating Weight 4wd | 17526.8lb | 7950kg |
03 Transmission Specification
| Transmission Type | JCB 4WD | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.7mph | 38km/h |
| Max Speed Reverse | 23.7mph | 38km/h |
04 Hydraulic Specification
| Pump Type | twin gear | |
|---|---|---|
| Pump Flow Capacity | 40.5gal/min | 153L/min |
| Relief Valve Pressure | 3640.5psi | 25100kPa |
05 Backhoe Dimensions
| Reach From Swivel - Std | 21.46ft in | 6540mm |
|---|---|---|
| Dig Depth - Std | 18.15ft in | 5530mm |
| Load At Max Lift - Std | 4155.72lb | 1885kg |
| Bucket Dig Force - Std | 14001.56lb | 6351kg |
06 Dimensions Dimensions
| Transport Length | 19.39ft in | 5910mm |
|---|---|---|
| Transport Width | 7.71ft in | 2350mm |
| Transport Height | 11.68ft in | 3560mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.83ft in | 2690mm |
|---|---|---|
| Lift Capacity At Full Height | 9651.84lb | 4378kg |
| Bucket Capacity | 1.57yd3 | 1.2m3 |
| Bucket Width | 92.52in | 2350mm |
| Bucket Breakout Force | _- | 63.74kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.