Specification sheet Wheel Loader Ref jcb-456zx-high-lift-wheel-loader
JCB 456ZX High Lift
The JCB 456ZX High Lift is a wheel loader with an operating weight of 470,361 lb (213,352.16 kg), a 205 hp engine, and a 3.7 yd³ (2.83 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
470,361lb
213,352.16kg
Engine power
205hp
152.9kW
Net Power Bucket capacity
3.7yd³
2.83m³
◆Where it sits in its classpercentile · very large wheel loaders
Among 45 very large wheel loaders (>150,000 lb), the JCB 456ZX High Lift sits above the median for its class:
- Operating weight 470,360 lb heavier than 84% (n=45)
- Engine power 205 hp less powerful than 100% (n=41)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | 6CT 8.3C | |
|---|---|---|
| Net Power | 205hp | 152.9kw |
| Gross Power | 197hp | 147kw |
| Max Torque | 733lb ft | 993.9Nm |
| Displacement | 8.3cu in | 0.2L |
| Aspiration | Turbo charged |
02 Operational Specification
| Operating Weight | 470361lb | 213352.2kg |
|---|---|---|
| Fuel Capacity | 85gal | 321.8L |
| Hydraulic System Fluid Capacity | 57gal | 215.8L |
| Engine Oil Fluid Capacity | 5gal | 19L |
| Cooling System Fluid Capacity | 11gal | 41.7L |
| Transmission Fluid Capacity | 9gal | 34.1L |
| Front Axle/Diff Fluid Capacity | 18gal | 68.2L |
| Rear Axle/Diff Fluid Capacity | 13gal | 49.3L |
| Static Tipping Weight | 25563lb | 11595.2kg |
| Turning Radius | 22.3ft in | 6770mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 23.5x25x20 |
03 Transmission Specification
| Transmission Type | Smooth shift powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.4mph | 37.7km/h |
| Max Speed - Reverse | 15.3mph | 24.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3625psi | 24993.5kPa |
|---|---|---|
| Pump Flow Capacity | 43gal/min | 162.8L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.2sec | |
| Lower Time | 4.1sec | |
| Pump Type | Twin variable displacement piston pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 11.14ft in | 3395mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.7yd3 | 2.83m3 |
| Bucket Capacity - Struck | 3.27yd3 | 2.5m3 |
| Bucket Width | 9.31ft in | 2837mm |
| Breakout Force | 36868.67lb | 164kN |
06 Dimensions Dimensions
| Ground Clearance | 1.55ft in | 470mm |
|---|---|---|
| Length With Bucket On Ground | 27.96ft in | 8520mm |
| Width Over Tires | 8.87ft in | 2702mm |
| Height To Top Of Cab | 11.06ft in | 3370mm |
| Wheelbase | 6.89ft in | 2100mm |
| Hinge Pin - Max Height | 15.35ft in | 4677mm |
| Reach At Max Lift And Dump | 3.63ft in | 1105mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.