Specification sheet Wheel Loader Ref jcb-456bzx-wheel-loader
JCB 456BZX
The JCB 456BZX is a wheel loader with a 190 hp engine, and a 3.67 yd³ (2.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
190hp
141.7kW
Net Power Bucket capacity
3.67yd³
2.8m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6CT8.33-C | |
| Net Power | 190hp | 141.7kw |
| Gross Power | 205hp | 152.9kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 643.2lb ft | 872Nm |
| Displacement | 506.5cu in | 8.3L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Fuel Capacity | 85.9gal | 325L |
|---|---|---|
| Hydraulic System Fluid Capacity | 56.8gal | 215L |
| Engine Oil Fluid Capacity | 5gal | 18.9L |
| Cooling System Fluid Capacity | 10.1gal | 38L |
| Transmission Fluid Capacity | 7.4gal | 28L |
| Front Axle/Diff Fluid Capacity | 13.5gal | 51L |
| Rear Axle/Diff Fluid Capacity | 13.5gal | 51L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 23.5X25X12 PLY (L2) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.3mph | 37.4km/h |
| Max Speed - Reverse | 15.2mph | 24.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2774psi | 19126.1kPa |
|---|---|---|
| Pump Flow Capacity | 87gal/min | 329L/min |
| Raise Time | 5.3sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3.5sec | |
| Pump Type | variable displacement, load sensing pumps |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.98ft in | 3039mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.67yd3 | 2.8m3 |
| Bucket Capacity - Struck | 3.27yd3 | 2.5m3 |
| Bucket Width | 9.19ft in | 2800mm |
| Breakout Force | 45620lb | 202.93kN |
06 Dimensions Dimensions
| Ground Clearance | 1.48ft in | 450mm |
|---|---|---|
| Length With Bucket On Ground | 25.34ft in | 7722mm |
| Width Over Tires | 8.87ft in | 2702mm |
| Height To Top Of Cab | 10.63ft in | 3240mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 13.48ft in | 4107mm |
| Reach At Max Lift And Dump | 3.27ft in | 996mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.