Specification sheet Wheel Loader Ref jcb-436bht-wheel-loader
JCB 436BHT
The JCB 436BHT is a wheel loader with a 144 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
144hp
107.4kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 1006-60TW | |
| Net Power | 144hp | 107.4kw |
| Gross Power | 160hp | 119.4kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 489.1lb ft | 663Nm |
| Displacement | 365.3cu in | 6L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Fuel Capacity | 60.8gal | 230L |
|---|---|---|
| Hydraulic System Fluid Capacity | 55.5gal | 210L |
| Engine Oil Fluid Capacity | 3.9gal | 14.7L |
| Cooling System Fluid Capacity | 13.3gal | 50L |
| Transmission Fluid Capacity | 6.4gal | 24L |
| Front Axle/Diff Fluid Capacity | 10.4gal | 39L |
| Rear Axle/Diff Fluid Capacity | 9.6gal | 36L |
| Static Tipping Weight | 21907.4lb | 9937kg |
| Turning Radius | 19.3ft in | 5860mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 20.5x25x12 ply (L2) |
03 Transmission Specification
| Transmission Type | semi-autoshift full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.7mph | 38km/h |
| Max Speed - Reverse | 15mph | 24km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3625psi | 24993.5kPa |
|---|---|---|
| Pump Flow Capacity | 67.4gal/min | 255L/min |
| Raise Time | 5sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.5sec | |
| Pump Type | variable displacement piston pumps with load sensing |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.67ft in | 2947mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
| Bucket Width | 8.86ft in | 2700mm |
| Breakout Force | 34395.77lb | 153kN |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 459mm |
|---|---|---|
| Length With Bucket On Ground | 22.22ft in | 6770mm |
| Width Over Tires | 8.53ft in | 2597mm |
| Height To Top Of Cab | 10.67ft in | 3250mm |
| Wheelbase | 9.85ft in | 3000mm |
| Hinge Pin - Max Height | 13.12ft in | 3996mm |
| Reach At Max Lift And Dump | 3.43ft in | 1044mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.