Specification sheet Wheel Loader Ref jcb-426bht-wheel-loader
JCB 426BHT
The JCB 426BHT is a wheel loader with a 132 hp engine, and a 2.36 yd³ (1.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
132hp
98.5kW
Net Power Bucket capacity
2.36yd³
1.8m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 1006-60T | |
| Net Power | 132hp | 98.5kw |
| Gross Power | 144hp | 107.4kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 433.7lb ft | 588Nm |
| Displacement | 365.3cu in | 6L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Fuel Capacity | 56.1gal | 212L |
|---|---|---|
| Hydraulic System Fluid Capacity | 55.5gal | 210L |
| Engine Oil Fluid Capacity | 3.9gal | 14.7L |
| Cooling System Fluid Capacity | 13.3gal | 50L |
| Transmission Fluid Capacity | 6.1gal | 23L |
| Front Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Rear Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 17.5x25x12 ply (L2) |
03 Transmission Specification
| Transmission Type | 4 wheel drive, semi-autoshift full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.6mph | 37.9km/h |
| Max Speed - Reverse | 16.8mph | 26.9km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3212psi | 22146kPa |
|---|---|---|
| Pump Flow Capacity | 58.2gal/min | 220L/min |
| Raise Time | 4.8sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.4sec | |
| Pump Type | variable displacement piston pumps with load sensing system |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.44ft in | 2876mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.36yd3 | 1.8m3 |
| Bucket Width | 8.2ft in | 2498mm |
| Breakout Force | 27426.69lb | 122kN |
06 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 375mm |
|---|---|---|
| Length With Bucket On Ground | 21.46ft in | 6540mm |
| Width Over Tires | 7.89ft in | 2403mm |
| Height To Top Of Cab | 10.36ft in | 3155mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.6ft in | 3839mm |
| Reach At Max Lift And Dump | 3.24ft in | 986mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.