Specification sheet Wheel Loader Ref jcb-411bht-wheel-loader
JCB 411BHT
The JCB 411BHT is a wheel loader with a 80 hp engine, and a 1.57 yd³ (1.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
80hp
59.7kW
Net Power Bucket capacity
1.57yd³
1.2m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 1004-4TLR2 | |
| Net Power | 80hp | 59.7kw |
| Gross Power | 90hp | 67.2kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 239.8lb ft | 325Nm |
| Displacement | 243.5cu in | 4L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Fuel Capacity | 33.1gal | 125L |
|---|---|---|
| Hydraulic System Fluid Capacity | 29.1gal | 110L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Cooling System Fluid Capacity | 5.7gal | 21.5L |
| Transmission Fluid Capacity | 4.8gal | 18L |
| Front Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Static Tipping Weight | 11834.5lb | 5368kg |
| Turning Radius | 16.9ft in | 5150mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 72amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 15.5x25x12 SGL |
03 Transmission Specification
| Transmission Type | semi automatic full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 16.2mph | 26km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3190psi | 21994.3kPa |
|---|---|---|
| Pump Flow Capacity | 13.4gal/min | 50.6L/min |
| Raise Time | 4.6sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3sec | |
| Pump Type | double gear pump with automatic unloader |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.61ft in | 2624mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.57yd3 | 1.2m3 |
| Bucket Capacity - Struck | 1.32yd3 | 1.01m3 |
| Bucket Width | 7.39ft in | 2250mm |
| Breakout Force | 16456.02lb | 73.2kN |
06 Dimensions Dimensions
| Ground Clearance | 1.35ft in | 410mm |
|---|---|---|
| Length With Bucket On Ground | 19.53ft in | 5952mm |
| Width Over Tires | 7.23ft in | 2203mm |
| Height To Top Of Cab | 9.89ft in | 3013mm |
| Wheelbase | 8.86ft in | 2700mm |
| Hinge Pin - Max Height | 11.45ft in | 3487mm |
| Reach At Max Lift And Dump | 3.04ft in | 925mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.