Specification sheet Backhoe Loader Ref jcb-3cx4smt-loader-backhoe
JCB 3CX4SMT
The JCB 3CX4SMT is a backhoe loader with a 90.2 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 17.92 ft (5,460 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
90.2hp
67.2kW
Gross Power Bucket capacity
1.31yd³
1m³
Dig depth
17.92ft
5,460mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the JCB 3CX4SMT sits above the median for its class:
- Engine power 90 hp more powerful than 61% (n=282)
- Dig depth 17.9 ft deeper-digging than 97% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2257 | |
|---|---|---|
| Engine Model | 444 | |
| Gross Power | 90.2hp | 67.2kw |
02 Operational Specification
| Fuel Capacity | 42.3gal | 160L |
|---|---|---|
| Operating Weight 4wd | 17791.4lb | 8070kg |
03 Transmission Specification
| Transmission Type | JCB 4WD | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.5mph | 36.1km/h |
| Max Speed Reverse | 22.5mph | 36.1km/h |
04 Hydraulic Specification
| Pump Type | twin gear | |
|---|---|---|
| Pump Flow Capacity | 36gal/min | 136L/min |
| Relief Valve Pressure | 3640.5psi | 25100kPa |
05 Backhoe Dimensions
| Reach From Swivel - Std | 21.4ft in | 6520mm |
|---|---|---|
| Dig Depth - Std | 17.92ft in | 5460mm |
| Load At Max Lift - Std | 3198.91lb | 1451kg |
| Bucket Dig Force - Std | 14001.56lb | 6351kg |
06 Dimensions Dimensions
| Transport Length | 18.44ft in | 5620mm |
|---|---|---|
| Transport Width | 7.71ft in | 2350mm |
| Transport Height | 11.85ft in | 3610mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.99ft in | 2740mm |
|---|---|---|
| Lift Capacity At Full Height | 6986.45lb | 3169kg |
| Bucket Capacity | 1.31yd3 | 1m3 |
| Bucket Width | 92.52in | 2350mm |
| Bucket Breakout Force | _- | 61.7kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.