Specification sheet Backhoe Loader Ref jcb-3cx4-loader-backhoe
JCB 3CX4
The JCB 3CX4 is a backhoe loader with an operating weight of 16,248.07 lb (7,370 kg), a 82.7 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 13.92 ft (4,240 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,248.07lb
7,370kg
Engine power
82.7hp
61.6kW
Gross Power Bucket capacity
1.31yd³
1m³
Dig depth
13.92ft
4,240mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the JCB 3CX4 sits in the middle of its class:
- Engine power 83 hp less powerful than 55% (n=282)
- Dig depth 13.9 ft shallower-digging than 80% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2257 | |
|---|---|---|
| Engine Model | 444 | |
| Gross Power | 82.7hp | 61.6kw |
02 Operational Specification
| Fuel Capacity | 42.3gal | 160L |
|---|---|---|
| Max Weight | 16248.1lb | 7370kg |
03 Transmission Specification
| Transmission Type | JCB 4WD | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.5mph | 36.1km/h |
| Max Speed Reverse | 22.5mph | 36.1km/h |
04 Hydraulic Specification
| Pump Type | twin gear | |
|---|---|---|
| Pump Flow Capacity | 32.8gal/min | 124L/min |
| Relief Valve Pressure | 3640.5psi | 25100kPa |
05 Backhoe Dimensions
| Reach From Swivel - Std | 17.62ft in | 5370mm |
|---|---|---|
| Dig Depth - Std | 13.92ft in | 4240mm |
| Load At Max Lift - Std | 3492.13lb | 1584kg |
| Bucket Dig Force - Std | 14217.62lb | 6449kg |
06 Dimensions Dimensions
| Transport Length | 18.44ft in | 5620mm |
|---|---|---|
| Transport Width | 7.71ft in | 2350mm |
| Transport Height | 11.85ft in | 3610mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.99ft in | 2740mm |
|---|---|---|
| Lift Capacity At Full Height | 7713.98lb | 3499kg |
| Bucket Capacity | 1.31yd3 | 1m3 |
| Bucket Width | 92.52in | 2350mm |
| Bucket Breakout Force | _- | 61.7kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.